
Building & IndustrialSKU IP-OXPRIMER-LIGHTGREY-1L
Rust-Inhibiting Oxide Primer for Metal & Wood
Brand: Unbranded
Price shown updates with the option you pick.
This oil-based oxide primer prepares properly cleaned metal and timber for a compatible finishing system. Its rust-inhibiting formulation supports corrosion protection on steel while promoting adhesion between the prepared substrate and subsequent topcoats.
Technical specification
| Coating type | Oil-based, rust-inhibiting oxide primer |
|---|---|
| Recommended substrates | Prepared steel, metal fabrications and suitable timber |
| Role in the system | Primer coat beneath a compatible finish |
| Application | Brush, roller or suitable spray equipment |
| Approximate coverage | 8 m² per litre, depending on substrate and film build |
| Touch dry | Approximately 6–8 hours in suitable dry, ventilated conditions |
| Pack sizes | 1L, 2.5L, 5L, 20L and 205L |
Surface preparation
Remove oil, grease, dirt, salts, loose coatings and corrosion. Feather firmly bonded paint edges and abrade smooth surfaces to provide a key. The substrate must be clean, dry and structurally sound. Check that any retained coating is compatible with both the primer and the intended finish. Timber should be dry, clean and prepared for the selected coating system.
Application guidance
Stir thoroughly before use and during application. Apply a continuous, even primer film, working carefully around edges, welds, fixings and other corrosion-prone details. Avoid excessive build, missed areas and application onto damp or contaminated surfaces. Use white spirit for thinning only where directed by the current product guidance.
Topcoating and coverage planning
Use the approximate 8 m²/L figure to estimate one coat, allowing extra material for rough, porous or complex surfaces. Apply a compatible topcoat within the product’s stated overcoating window. Primer shade is not a substitute for the specified finish colour, and this primer should not be treated as the final decorative weathering coat.
Use and safety
Drying and overcoating times vary with temperature, humidity, ventilation, substrate and film thickness. Follow the current label, technical guidance and safety information. Provide suitable ventilation, wear appropriate personal protective equipment and keep the container securely closed when not in use.
The application image is illustrative. Screen colours are not an exact paint-colour reference.
Product details
| SKU | IP-OXPRIMER-LIGHTGREY-1L |
|---|---|
| Weight | 2.2 lb |
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Rust-Inhibiting Oxide Primer for Metal & Wood