
SEAL034CP - Chrome Shower Screen Seal - Fits 8-10mm Glass - Fits 18mm to 23mm gaps
Brand: Industrial Polymers UK
What this seal is
A chrome-effect shower screen seal for 8–10mm glass, sealing gaps of 18mm to 23mm between the glass and the bath, tray or wall. The rigid PVC U-channel simply pushes onto the edge of the glass — no adhesive needed — and comfortably grips 8mm, 9mm or 10mm glass.
It is most commonly fitted along the bottom horizontal edge of a bath screen or shower door, and works just as well vertically on the upright of the glass to seal against the tiles or wall. The chrome finish blends seamlessly with a chrome-framed enclosure — and unlike a clear seal, it will not discolour over time.
Choose your length
Available in 800mm, 900mm, 1400mm or 2000mm lengths and easily cut down at home. If your glass edge sits between two sizes, order the next length up and trim it — or use our custom cutting service and it arrives ready to fit.
Specification
| Fits glass thickness | 8mm, 9mm or 10mm |
| Gap range covered | 18mm – 23mm |
| Colour | Chrome effect |
| Lengths available | 800mm, 900mm, 1400mm or 2000mm — custom cutting service available |
| Material | Rigid PVC U-section |
| Fitting | Push-fit — no adhesive required |
| Sold as | Single length |
| Glass type | Straight glass only |
| Cutting down | Easily cut to the length you require |
Why fit this seal
Stops leaks and protects floors. A worn or missing bottom seal is the most common cause of water pooling outside the shower — replacing it takes minutes and protects flooring, skirting and plaster.
Matches your chrome frame. The chrome finish sits seamlessly alongside a chrome-framed enclosure and stays looking smart — no yellowing or discolouring.
No adhesive, no mess. The U-channel grips 8–10mm glass on its own — it slides straight on and can be removed without residue.
UK stock, fast dispatch. Order before 2pm and your seal is dispatched the same working day.
Fitting in three steps
1. Measure. Check your glass is 8–10mm thick, measure the edge to be sealed, and confirm the gap is between 18mm and 23mm.
2. Choose. Pick the nearest length at or above your measurement.
3. Fit. Remove the old seal, trim the new one to length if needed, then push the channel onto the edge of the glass so the seal closes the gap. No tools, no adhesive, no drying time.
Not sure it fits?
Email a photo of your old seal or your measurements to sales@industrial-polymers.co.uk and our UK team will confirm the right profile and size before you order — usually the same working day.
Fitting or fixing a shower door? These usually go in the same basket:
Not sure this seal fits? Shop by your glass thickness:
Request a Quote
Fast, no-obligation price from our UK team for:SEAL034CP - Chrome Shower Screen Seal - Fits 8-10mm Glass - Fits 18mm to 23mm gaps
