Shower Enclosure Door Handle Chrome - Length of 200mm

What this handle is

A stylish chrome-effect replacement handle for shower enclosure doors, complete with a knob for the inside of the door. It measures 200mm overall and suits any glass door drilled with 130mm between hole centres — simply unscrew your old handle and screw this one on in minutes.

The fixing bolts measure 5.5mm in diameter, so the handle fits holes in the glass of 6mm diameter or more. Two glass-protection washers are included to cushion the fittings against the glass, and the inside knob makes the door easy to open from within the shower.

Specification

Why fit this handle

Instant refresh for a tired door. A corroded or wobbly handle lets an otherwise good enclosure down — the chrome-effect finish smartens the door in minutes.

Straightforward swap. If your door is drilled at 130mm centres there's nothing to drill or modify: unscrew the old handle, screw on the new one.

Kind to your glass. The two included protection washers keep the metal fittings off the glass as you tighten.

UK stock, fast dispatch. Held in stock in the UK and dispatched same day when you order before 2pm.

Fitting in three steps

1. Measure. Measure the distance between the centres of the two holes in your glass — it needs to be 130mm — and check each hole is at least 6mm in diameter.

2. Remove. Unscrew and lift away your old handle and knob.

3. Fit. Position the glass-protection washers, offer up the new handle with the knob on the inside of the door, and screw together until snug — done in minutes.

Not sure it fits?

Email a photo of your old handle or your measurements to sales@industrial-polymers.co.uk and our UK team will confirm it suits your door before you order — usually the same working day.