Shower Enclosure Door Handle Knob Chrome - Length of 170mm

What these handles are

A pair of stylish chrome-effect replacement handles for shower enclosure doors, 170mm long with 145mm between hole centres. The pair fits both the inside and outside of your door, so a worn or broken handle is replaced completely rather than patched.

The fixing bolt measures 5.5mm in diameter, so the handles fit any glass door with holes of 6mm minimum diameter. Two glass protection washers are included to cushion the fittings against the glass.

Specification

Why fit these handles

Fitted in minutes. Simply unscrew your old handles and screw the new pair on — no specialist tools and no need to take the door off its hinges.

Protects your glass. The two included protection washers sit between the metal and the glass, cushioning the fixings as they tighten.

A complete pair. With handles for both the inside and outside of the door, the whole grip is renewed in one go.

Smart chrome finish. The chrome effect suits most modern enclosures, so a tired handle doesn't have to spoil the look of your shower.

Fitting in three steps

1. Measure. Check the distance between the hole centres on your door is 145mm and the holes are at least 6mm in diameter.

2. Remove. Unscrew your old handles and lift them away.

3. Fit. Place a glass protection washer on each side of the glass, then screw the inside and outside handles together through the holes and tighten by hand. Done in minutes.

Not sure it fits?

Email a photo of your old handle or your measurements to sales@industrial-polymers.co.uk and our UK team will confirm the right replacement before you order — usually the same working day.