Shower Enclosure Door Handle Knob Chrome - Length of 195mm

What this handle is

A stylish chrome-effect replacement knob handle for shower enclosure doors, 195mm long and supplied as a pair to fit both the inside and outside of your door. It suits any door with 160mm between hole centres and screws straight into place — no drilling or specialist tools needed.

The fixing bolt measures 5.5mm in diameter, so it will fit any hole in your glass of 6mm diameter or more. Two glass protection washers are included to cushion the handle against the glass.

Specification

Why fit this handle

Instant refresh for your enclosure. A tarnished or broken handle lets the whole shower down — this chrome-effect pair restores a clean, modern look in minutes.

Fits in minutes. Simply unscrew your old handle and screw the new one on — the whole job takes only a few minutes with no drilling required.

Protects your glass. The two included protection washers cushion the handle against the glass for a secure, rattle-free fit.

Complete pair supplied. One order covers both sides of the door, inside and outside, so there is nothing else to buy.

Fitting in three steps

1. Measure. Check the distance between the hole centres on your door is 160mm and the holes in the glass are at least 6mm in diameter.

2. Remove. Unscrew and remove your old handle, keeping the glass supported.

3. Fit. Position the new handles on each side of the glass with the protection washers in place and screw them together until snug — done within minutes.

Not sure it fits?

Email a photo of your old handle or your measurements to sales@industrial-polymers.co.uk and our UK team will confirm the right size before you order — usually the same working day.