Shower Enclosure Door Handle Knob Chrome - Length of 200mm

What this handle is

A stylish chrome-effect replacement shower door handle, 200mm long and supplied as a pair — one handle for the inside and one for the outside of the door. It is the ideal replacement for any glass shower door drilled with 145mm between hole centres.

Fitting is simple screw-fit: unscrew your old handle and screw the new one on within minutes. The fixing bolt measures 5.5mm in diameter, so it suits any hole of 6mm or more, and two glass protection washers are included to keep metal off the glass.

Check your measurements

Measure centre-to-centre between the two fixing holes in your door — this handle needs 145mm. Then check each hole is at least 6mm in diameter for the 5.5mm fixing bolts. If both match, it fits.

Specification

Why fit this handle

An instant refresh. A pitted, corroded or wobbly handle lets the whole enclosure down — a new chrome pair makes the door look new again.

Fits in minutes. Simply unscrew the old handle and screw this one on. No drilling, no specialist tools.

Kind to your glass. The two included protection washers cushion the fixing points so metal never bears directly on the glass.

Both sides sorted. Sold as a pair, so the inside and outside of the door match perfectly.

Fitting in three steps

1. Measure. Check the distance between your hole centres is 145mm and each hole is at least 6mm in diameter.

2. Choose. Confirm the 200mm chrome handle suits your door — email us a photo if you are unsure.

3. Fit. Unscrew the old handle, position the glass protection washers, then screw the new handles on either side of the door and tighten. Done in minutes.

Not sure it fits?

Email a photo of your old handle or your measurements to sales@industrial-polymers.co.uk and our UK team will confirm the right handle before you order — usually the same working day.