Shower Enclosure Door Handle Knob Chrome - Length of 205mm

What this handle is

A stylish chrome-effect replacement handle and knob for shower enclosure doors, 205mm long with 160mm between hole centres. If your existing handle has snapped, corroded or worked loose, this one screws straight into the existing holes in the glass — simply unscrew the old handle and screw the new one on within minutes.

The fixing bolt measures 5.5mm in diameter, so it suits glass with fixing holes of 6mm diameter or more. Two glass-protection washers are included, and the knob sits on the inside of the door so the shower is easy to open from within.

Specification

Why fit this handle

Fitted in minutes. No drilling and no specialist tools — unscrew the old handle, screw this one into the same holes and the job is done.

Protects your glass. The two included glass-protection washers cushion the fixings against the glass as you tighten them.

Easy to open from inside. The knob on the inner face of the door gives you a proper grip to open the shower from within.

UK stock, fast dispatch. Held in UK stock and dispatched same day when you order before 2pm.

Fitting

1. Measure. Check the distance between the hole centres on your door is 160mm and the holes in the glass are at least 6mm in diameter.

2. Remove. Unscrew and lift away your old handle.

3. Fit. Position the glass-protection washers, then screw the new handle on with the knob facing the inside of the door.

Not sure it fits?

Email a photo of your old handle or your measurements to sales@industrial-polymers.co.uk and our UK team will confirm the right handle before you order — usually the same working day.