Shower Enclosure Door Handle Knob Chrome - Length of 220mm

What this handle is

A stylish chrome-effect replacement handle and knob for shower enclosure doors, 220mm long with 145mm between hole centres. It is the ideal like-for-like swap for any glass door whose old handle has corroded, cracked or worked loose.

Fitting is screw-fit through the existing holes in your glass: simply unscrew the old handle and screw this one on in minutes. The knob sits on the inside of the door, so the shower door opens easily from inside the enclosure too.

Will it fit my door?

Measure centre-to-centre between the two holes in your glass — this handle needs 145mm. Then check the holes themselves: the fixing bolt is 5.5mm in diameter, so it fits holes of 6mm diameter or larger.

Specification

Why fit this handle

Instant like-for-like replacement. If your old handle is pitted, broken or loose, matching the 145mm hole centres means this one screws straight on — no new holes, no glazier.

Protects your glass. Two glass protection washers are included, cushioning the fixings against the glass as you tighten.

Easy to use from both sides. The bar handle on the outside pairs with a knob on the inside, so the door opens easily whichever side you are on.

Fitted in minutes. Unscrew the old handle, screw the new one on — the whole job takes just a few minutes with no special tools.

Fitting

1. Measure. Check the distance between the hole centres in your glass is 145mm and the holes are at least 6mm in diameter.

2. Remove. Unscrew and lift away your old handle and knob.

3. Fit. Position the glass protection washers, offer the new handle up to the holes with the knob on the inside of the door, and screw together until snug. Done in minutes.

Not sure it fits?

Email a photo of your old handle or your measurements to sales@industrial-polymers.co.uk and our UK team will confirm the right handle before you order — usually the same working day.