Shower Screen Seal - 8-10mm Glass, Twin Fin, 10mm

What this seal is

A clear gap seal for shower doors and bath screens with thick 8–10mm glass, closing gaps of 5mm to 10mm. The rigid PVC U-channel pushes straight onto the edge of the glass with no adhesive at all, and the seal bridges the gap between the glass and your tray, bath, tiles or wall.

It is most often fitted along the bottom horizontal edge of a bath screen or shower door, and works just as well vertically on the upright of the glass to seal against the tiles or wall.

Specification

Why fit this seal

Stops leaks and protects floors. A worn or missing seal is the most common reason water pools outside the shower. Replacing it protects flooring, skirting and plaster from long-term water damage.

Made for thick glass. The channel is sized to grip 8–10mm frameless-style glass securely, with a seal reach that covers gaps from 5mm right up to 10mm.

No adhesive, no mess. It slides straight onto the glass and comes off again without leaving residue — and the clear PVC is barely visible once fitted.

UK stock, fast dispatch. Held in stock in the UK and dispatched the same working day when you order before 2pm.

Fitting in three steps

1. Measure. Check your glass is 8–10mm thick and measure the gap you need to close — it should be between 5mm and 10mm.

2. Choose. Pick the nearest length at or above your glass edge, or use our custom cutting service.

3. Fit. Trim to length if needed, then push the channel onto the edge of the glass so the seal closes the gap. No tools, no adhesive, no drying time.

Not sure it fits?

Email a photo of your old seal or your measurements to sales@industrial-polymers.co.uk and our UK team will confirm the right profile and size before you order — usually the same working day.