Shower Seals & Spares
T-Seal Carrier for 8-10mm Glass - Zero Gap - 800-2000mm - Profile 2
Price shown updates with the option you pick.
What this seal is
A clear carrier channel for 8–10mm glass that lets you run a T-shaped seal where the glass sits tight to the tray or wall. The rigid PVC U-section pushes onto the edge of the glass — no adhesive needed — and its groove accepts our various T-shaped channel seals, which simply slide in.
It’s the answer when a standard wipe or gap seal won’t work: fit the carrier to the bottom horizontal edge of a bath screen or shower door, or vertically on the upright between glass and tiles, then choose the T-seal that closes your particular gap.
Specification
| Fits glass thickness | 8mm – 10mm |
| Type | Carrier channel — accepts slide-in T-shaped seals |
| Colour | Clear |
| Lengths available | 800mm, 900mm, 1400mm or 2000mm — custom cutting service available |
| Material | Rigid PVC U-section |
| Fitting | Push-fit onto the glass — no adhesive required |
| Sold as | Single length (T-seal insert sold separately) |
| Glass type | Straight glass (contact us for our curved-seal service) |
| Cutting down | Easily cut to length once received |
Why fit this seal
Seals where standard seals can’t. When no ordinary gap seal suits your screen, the carrier-plus-T-seal combination gives you a two-part solution you can tailor to the exact gap.
No adhesive, no mess. The U-section grips 8–10mm glass on its own — it slides straight on and can be removed or repositioned without leaving residue on the glass.
Easy blade swaps. Once the carrier is on the glass, a worn T-seal slides out and a new one slides in — future replacements take seconds and cost pennies.
Cut to fit at home. Order the next length up and trim it down for an exact fit, or use our custom cutting service and it arrives ready to fit.
Fitting in three steps
1. Measure. Check your glass is 8–10mm thick, measure the length of the glass edge, and measure the gap so you can pick the right T-seal insert.
2. Choose. Pick the nearest carrier length at or above your measurement, plus the T-shaped seal that suits your gap.
3. Fit. Trim the carrier to length and push it onto the edge of the glass, then slide your chosen T-seal into the groove until it runs end to end.
Not sure it fits?
Email a photo of your old seal or your measurements to sales@industrial-polymers.co.uk and our UK team will confirm the right carrier and T-seal before you order — usually the same working day. Got curved glass? We can curve this seal to your measurements — just get in touch and we’ll send you our simple measuring guide.
Complete the job
Fitting or fixing a shower door? These usually go in the same basket:
Not sure this seal fits? Shop by your glass thickness:
Request a quote
Fast, no-obligation price from our UK team for:T-Seal Carrier for 8-10mm Glass - Zero Gap - 800-2000mm - Profile 2