
Shower Seals & Spares
Shower Screen Seal - 4-6mm Glass, Seals 18-23mm Gaps
Price shown updates with the option you pick.
What this seal is
A clear shower screen seal for 4–6mm glass, sealing gaps of 18mm to 23mm between the glass and the bath, tray or wall. The rigid PVC U-channel simply pushes onto the edge of the glass — no adhesive needed — and comfortably grips 4mm, 5mm or 6mm glass.
It is most commonly fitted along the bottom horizontal edge of a bath screen or shower door, and works just as well vertically on the upright of the glass to seal against the tiles or wall. The clear PVC is barely visible once fitted.
Choose your length
Available in 800mm, 900mm, 1400mm or 2000mm lengths and easily cut down at home. If your glass edge sits between two sizes, order the next length up and trim it — or use our custom cutting service and it arrives ready to fit.
Specification
| Fits glass thickness | 4mm, 5mm or 6mm |
| Gap range covered | 18mm – 23mm |
| Colour | Clear |
| Lengths available | 800mm, 900mm, 1400mm or 2000mm — custom cutting service available |
| Material | Rigid PVC U-section |
| Fitting | Push-fit — no adhesive required |
| Sold as | Single length |
| Glass type | Straight glass (contact us for our curved-seal service) |
| Cutting down | Easily cut to the length you require |
Why fit this seal
Stops leaks and protects floors. A worn, discoloured or missing bottom seal is the most common cause of water pooling outside the shower — replacing it takes minutes and protects flooring, skirting and plaster.
No adhesive, no mess. The U-channel grips 4–6mm glass on its own — it slides straight on and can be removed without leaving residue.
Barely visible once fitted. The clear PVC blends into the glass, keeping your enclosure looking clean and bright.
Cut to fit at home. Order the next length up and trim it down for a perfect edge-to-edge fit, or use our custom cutting service and it arrives ready to fit.
Fitting in three steps
1. Measure. Check your glass is 4–6mm thick, measure the edge to be sealed, and confirm the gap is between 18mm and 23mm.
2. Choose. Pick the nearest length at or above your measurement.
3. Fit. Remove the old seal, trim the new one to length if needed, then push the channel onto the edge of the glass so the seal closes the gap. No tools, no adhesive, no drying time.
Not sure it fits?
Email a photo of your old seal or your measurements to sales@industrial-polymers.co.uk and our UK team will confirm the right profile and size before you order — usually the same working day. Got curved glass? We can curve this seal to your measurements — just get in touch and we'll send you our simple measuring guide.
Complete the job
Fitting or fixing a shower door? These usually go in the same basket:
Not sure this seal fits? Shop by your glass thickness:
Request a quote
Fast, no-obligation price from our UK team for:Shower Screen Seal - 4-6mm Glass, Seals 18-23mm Gaps
