Shower Screen Seal - 4-6mm Glass, Channel on Base Foot

What this seal is

A clear carrier seal for shower and bath screens with 4mm, 5mm or 6mm glass. The rigid PVC U-section grips the edge of the glass with no additional adhesive, and various T-shaped channel seals slide into its groove — ideal for sealing a gap where a standard one-piece seal will not work.

Seals like this are most commonly found along the bottom horizontal edge of a bath screen or shower door, and work just as well vertically on the upright of the glass to seal against the tiles or wall.

Choose your length

Measure the edge of the glass you are sealing and pick the nearest length at or above it — 800mm, 900mm, 1400mm or 2000mm. If your measurement sits between two lengths, choose the longer one and trim it down, or add our custom cutting service and it arrives ready to fit.

Specification

Why fit this seal

Solves awkward sealing jobs. Where a standard seal will not fit, the carrier channel lets you slide in the T seal that matches your gap — a flexible answer for tricky screens.

Replace the wearing part, keep the carrier. When a T seal eventually wears, it slides out and a fresh one slides in — no need to change the whole profile.

No adhesive, no mess. The U-section grips 4–6mm glass on its own, so it pushes straight on and can be removed later without leaving residue on the glass.

Cut to fit at home. Order the next length up and trim it down for a perfect edge-to-edge fit, or use our custom cutting service.

Fitting in three steps

1. Measure. Check your glass is 4–6mm thick, measure the gap you need to close and the edge of the glass you are sealing.

2. Choose. Pick the nearest length at or above your measurement, along with the T seal to suit your gap.

3. Fit. Remove the old seal, clean the glass edge, trim the new seal to size, push the U-section onto the glass and slide your chosen T seal into the groove.

Not sure it fits?

Email a photo of your old seal or your measurements to sales@industrial-polymers.co.uk and our UK team will confirm the right profile and T seal before you order — usually the same working day. Got curved glass? We can curve this seal to your measurements — just get in touch and we'll send you our simple measuring guide.