
Shower Seals & Spares
Shower Screen Seal - 8-10mm Glass, Seals 3-6mm Gaps
Price shown updates with the option you pick.
What this seal is
A clear shower screen seal for 8–10mm glass that closes gaps of 3mm to 6mm. The rigid PVC U-section pushes straight onto the edge of the glass and grips it comfortably with no adhesive, while the seal bridges the gap to the bath, tray, wall or tiles — stopping water escaping every time you shower.
It is most commonly fitted along the bottom horizontal edge of a bath screen or shower door, and can also be used vertically on the upright of the glass to seal between the glass and the tiles or wall.
Specification
| Fits glass thickness | 8mm, 9mm or 10mm |
| Seals gaps of | 3mm to 6mm |
| Colour | Clear |
| Lengths available | 800mm, 900mm, 1400mm or 2000mm — custom cutting service available |
| Material | Rigid PVC U-section |
| Fitting | Push-fit — no adhesive required |
| Position | Bottom edge of the glass, or vertically against the wall or tiles |
| Glass type | Straight glass (contact us for our curved-seal service) |
| Cutting down | Easily cut to the length you require at home |
Why fit this seal
Stops leaks and protects your floor. A worn or missing bottom seal is the most common cause of water escaping under a shower door or bath screen. Replacing it takes minutes and protects flooring, skirting and plaster from long-term water damage.
No adhesive, no mess. The U-section grips 8–10mm glass on its own — it slides straight onto the edge and can be removed or repositioned without leaving any residue.
Neat, discreet finish. Designed for smaller 3–6mm gaps, the compact profile closes the clearance tightly and the clear PVC is barely visible once fitted.
Cut to fit at home. Order the next length up and trim it down for a perfect edge-to-edge fit, or use our custom cutting service and it arrives ready to fit.
Fitting in three steps
1. Measure. Check your glass is 8–10mm thick, measure the edge you are sealing, and measure the gap between the glass and the surface below or beside it.
2. Choose. Confirm your gap falls within 3–6mm, then pick the nearest length at or above your measurement.
3. Fit. Trim to length if needed, then push the U-section onto the edge of the glass so the seal closes against the bath, tray, wall or tiles. No tools, no adhesive, no drying time.
Not sure it fits?
Email a photo of your old seal or your measurements to sales@industrial-polymers.co.uk and our UK team will confirm the right profile and length before you order — usually the same working day. Got curved glass? We can curve this seal to your measurements too; just get in touch and we'll send you our simple measuring guide.
Complete the job
Fitting or fixing a shower door? These usually go in the same basket:
Not sure this seal fits? Shop by your glass thickness:
Request a quote
Fast, no-obligation price from our UK team for:Shower Screen Seal - 8-10mm Glass, Seals 3-6mm Gaps
