Shower Screen Seal - 8-10mm Glass, Seals 6-11mm Gaps

What this seal is

A clear replacement seal for shower doors and bath screens with 8–10mm glass. The rigid PVC U-section pushes onto the edge of the glass — no adhesive needed — and the flexible fin closes gaps of 6mm to 11mm, stopping water escaping every time you shower.

It is most often fitted horizontally along the bottom edge of a bath screen or shower door, and works just as well vertically on the upright of the glass to seal against the tiles or wall.

Specification

Why fit this seal

Stops leaks instantly. A worn, discoloured or missing seal is the most common cause of water pooling outside the shower. Replacing it takes minutes and protects flooring, skirting and plaster from long-term water damage.

No adhesive, no mess. The channel grips 8–10mm glass on its own — it slides straight on and can be removed again without leaving residue on the glass.

Barely visible once fitted. The clear PVC blends into frameless and semi-frameless enclosures while the flexible fin quietly closes a 6–11mm gap.

UK stock, fast dispatch. Held in stock in the UK and dispatched same day when you order before 2pm.

Fitting in three steps

1. Measure. Check your glass is 8–10mm thick, measure the length of the edge to be sealed, and measure the gap you need to close (6–11mm for this seal).

2. Choose. Pick the nearest length at or above your measurement — 800mm, 900mm, 1400mm or 2000mm — or use our custom cutting service.

3. Fit. Trim to length if needed, then push the channel onto the edge of the glass so the fin faces the gap. No tools, no adhesive, no drying time.

Not sure it fits?

Email a photo of your old seal or your measurements to sales@industrial-polymers.co.uk and our UK team will confirm the right profile and size before you order — usually the same working day.