Shower Screen Seal - 8-10mm Glass, Seals Gaps Up To 3mm

What this seal is

A clear bubble seal for shower doors and bath screens with thick 8–10mm glass, closing small gaps of up to 3mm. The rigid PVC U-channel pushes straight onto the edge of the glass with no adhesive at all, and the soft flexible bubble along the bottom compresses against the tray, bath, tiles or wall to keep water inside.

It is most often fitted along the bottom horizontal edge of a bath screen or shower door, and works just as well vertically on the upright of the glass to seal against the tiles or wall.

Specification

Why fit this seal

Stops leaks and protects floors. Even a small gap under a screen lets a surprising amount of water out over a shower. The soft bubble closes gaps up to 3mm and keeps flooring, skirting and plaster dry.

Made for thick glass. The channel is sized to grip 8–10mm frameless-style glass securely, and the clear PVC keeps the enclosure's clean look.

No adhesive, no mess. It slides straight onto the glass and comes off again without leaving residue.

UK stock, fast dispatch. Held in stock in the UK and dispatched the same working day when you order before 2pm.

Fitting in three steps

1. Measure. Check your glass is 8–10mm thick and confirm the gap you need to close is no more than 3mm.

2. Choose. Pick the nearest length at or above your glass edge, or use our custom cutting service.

3. Fit. Trim to length if needed, then push the channel onto the edge of the glass so the bubble faces the gap. No tools, no adhesive, no drying time.

Not sure it fits?

Email a photo of your old seal or your measurements to sales@industrial-polymers.co.uk and our UK team will confirm the right profile and size before you order — usually the same working day.