
Shower Seals & Spares
Shower Screen Seal - 8-10mm Glass, 30mm Fin & Flick Fin
Price shown updates with the option you pick.
What this seal is
A clear replacement seal for shower screens and doors with 8–10mm glass. The rigid PVC U-channel pushes straight onto the edge of the glass — no adhesive needed — and seals the larger gaps of 25mm to 30mm between the glass and the bath, tray, tiles or wall, stopping water escaping every time you shower.
You’ll most often find this profile fitted horizontally along the bottom edge of a bath screen or shower door, but it works just as well vertically on the upright of the glass. It is designed for straight glass only.
Choose your length
Four lengths are available: 800mm, 900mm, 1400mm or 2000mm. Measure the edge of glass you’re sealing and pick the nearest length at or above it — the seal cuts down easily at home, or add the Custom Cut option and it arrives trimmed to your exact size.
Specification
| Fits glass thickness | 8mm, 9mm or 10mm |
| Seals gaps of | 25mm – 30mm |
| Colour | Clear |
| Lengths available | 800mm, 900mm, 1400mm or 2000mm — custom cutting service available |
| Material | Rigid PVC U-section |
| Fitting | Push-fit onto the glass — no adhesive required |
| Position | Horizontal along the bottom edge, or vertical on the upright |
| Glass type | Straight glass only |
| Cutting down | Easily cut to size at home once received |
Why fit this seal
Stops leaks and protects your bathroom. A worn or missing screen seal lets water pool on the floor, where it slowly damages flooring, skirting and plaster. Replacing it takes minutes.
Closes a big gap neatly. With a sealing range of 25–30mm, this profile handles the larger gaps that standard wipe seals can’t reach.
No adhesive, no mess. The U-channel grips 8–10mm glass on its own — it pushes straight on and can be removed without leaving residue on the glass.
UK stock, fast dispatch. Held in stock in the UK and dispatched same working day when ordered before 2pm.
Fitting in three steps
1. Measure. Check your glass is 8–10mm thick, measure the length of the edge to be sealed, and confirm the gap is between 25mm and 30mm.
2. Choose. Pick the nearest length at or above your measurement — 800mm, 900mm, 1400mm or 2000mm.
3. Fit. Trim to length if needed, then push the channel onto the edge of the glass so the seal closes the gap. No adhesive, no drying time.
Not sure it fits?
Email a photo of your old seal or your measurements to sales@industrial-polymers.co.uk and our UK team will confirm the right profile and size before you order — usually the same working day.
Complete the job
Fitting or fixing a shower door? These usually go in the same basket:
Not sure this seal fits? Shop by your glass thickness:
Request a quote
Fast, no-obligation price from our UK team for:Shower Screen Seal - 8-10mm Glass, 30mm Fin & Flick Fin
