
Shower Seals & Spares
Shower Screen Seal - 8-10mm Glass, 15mm Curved Wrap Fin
Price shown updates with the option you pick.
What this seal is
A clear bottom-edge seal for shower and bath screens with 8–10mm glass. The rigid PVC U-section pushes straight onto the bottom edge of the glass and grips 8mm, 9mm or 10mm glass comfortably on its own — no adhesive, screws or tools required.
It runs along the bottom of a shower or bath screen in conjunction with an upstand or threshold. Rather than physically sealing a gap, it deflects splashing water back into the shower so it cannot escape over the threshold — keeping your bathroom floor dry and protected.
Choose your length
Four lengths are available — 800mm, 900mm, 1400mm or 2000mm. Pick the length at or just above the width of your screen and trim it down at home, or use our custom cutting service and it arrives ready to fit.
Specification
| Fits glass thickness | 8mm, 9mm or 10mm |
| Colour | Clear |
| Position | Along the bottom of a shower or bath screen, used with an upstand or threshold |
| Purpose | Stops splashing water escaping over the threshold — a deflector rather than a gap seal |
| Lengths available | 800mm, 900mm, 1400mm or 2000mm — custom cutting service available |
| Material | Rigid PVC |
| Fitting | Push-fit — no adhesive required |
| Sold as | Single length |
| Glass type | Straight glass only |
| Cutting down | Easily cut to length at home |
Why fit this seal
Keeps water where it belongs. A worn or missing bottom seal lets splashes escape over the threshold every time you shower. Replacing it protects flooring, skirting and plaster from long-term water damage.
No adhesive, no mess. The U-section grips 8–10mm glass on its own — it slides straight on and can be removed without leaving any residue on the glass.
Easy like-for-like replacement. If your old seal has discoloured or split, the new one pushes on in minutes — no tools, no drying time.
Cut to fit at home. Order the next length up and trim it for a neat edge-to-edge finish, or let us do it with the custom cutting service.
Fitting in three steps
1. Measure. Check your glass is 8–10mm thick and measure the width of the screen along the bottom edge.
2. Choose. Pick the nearest length at or above your measurement — 800mm, 900mm, 1400mm or 2000mm.
3. Fit. Trim to length if needed, then push the U-section onto the bottom edge of the glass so it sits just inside your threshold or upstand. Done — no tools, no adhesive.
Not sure it fits?
Email a photo of your old seal or your measurements to sales@industrial-polymers.co.uk and our UK team will confirm the right profile and length before you order — usually the same working day.
Complete the job
Fitting or fixing a shower door? These usually go in the same basket:
Not sure this seal fits? Shop by your glass thickness:
Request a quote
Fast, no-obligation price from our UK team for:Shower Screen Seal - 8-10mm Glass, 15mm Curved Wrap Fin
