Corner Piece for L-Shaped Bath Screens - Pairs with SEAL004

What this corner piece is

A rigid corner piece for shower and bath screen seals, fitting glass from 5mm to 11mm thick. It's most commonly found on L-shaped bath screens, where it finishes the corner of the glass and bridges the junction between two runs of seal.

Use it together with a compatible shower screen seal (available to purchase separately) if required — the corner piece takes care of the awkward change of direction that a straight length of seal can't manage on its own.

Specification

Why fit this corner piece

Seals the awkward corner. The point where an L-shaped screen turns is a common leak spot — a dedicated corner piece closes it neatly and keeps water inside the screen.

Works with your existing seal. Pair it with a compatible screen seal to run a continuous barrier around the whole screen.

Simple replacement. One rigid piece, sized for glass from 5mm to 11mm thick, restores a tired or missing corner in minutes.

UK stock, fast dispatch. Held in stock in the UK and dispatched same day when you order before 2pm.

Fitting in three steps

1. Measure. Check your glass is between 5mm and 11mm thick.

2. Choose. If you also need the straight runs, pick a compatible shower screen seal to go with the corner piece.

3. Fit. Place the corner piece over the corner of the glass so it bridges the junction, with your straight seals running up to it on each side.

Not sure it fits?

Email a photo of your old corner piece or your measurements to sales@industrial-polymers.co.uk and our UK team will confirm the right part before you order — usually the same working day.