Shower Support Bar - Spans Gaps of 700mm to 1200mm

What this support bar is

An adjustable telescopic support bar that holds and stabilises a wet room screen, shower screen or glass door. It clamps over the glass using the provided spacers — no holes to drill in the glass — and spans gaps of 700mm to 1200mm between two fixed glass panels.

Because the bar is telescopic there is no tricky cutting: simply extend it to the exact span you need and lock it in place with the grub screws for a smooth, finished look. The swivelling ends lock in position too, so the bar can be used at any angle your layout needs.

Specification

Why fit this support bar

Steadies wobbly glass. A large fixed panel that flexes or rattles feels unsafe — a support bar braces it rigidly against the adjacent panel and takes the movement out.

No drilling, no glass damage. The clips clamp over the edge of the glass with protective spacers, so there are no holes to drill and no risk to a toughened panel.

Fits your span exactly. Telescopic adjustment between 700mm and 1200mm means no measuring twice and cutting once — extend, lock the grub screws and it is done, with a clean smooth finish.

Matches your bathroom. Stainless steel with a polished chrome finish sits neatly alongside chrome enclosure hardware, and every fixing you need is included.

Fitting in three steps

1. Measure. Measure the distance between the two fixed glass panels — the bar spans 700mm to 1200mm.

2. Adjust. Extend the telescopic bar to the correct size, set the swivelling ends to the angle you need, and lock everything with the grub screws.

3. Fit. Insert the panels into the clips using the provided spacers to protect the glass, then tighten the screws to secure.

Not sure it fits?

Email a photo of your screen or your measurements to sales@industrial-polymers.co.uk and our UK team will confirm this bar suits your enclosure before you order — usually the same working day.