
Shower Seals & Spares
Black Wet Room Threshold Seal - 800mm to 2500mm
Price shown updates with the option you pick.
What this seal is
A rigid black acrylic threshold seal that creates a raised physical barrier water simply cannot cross. Bedded down onto a line of bathroom silicone, it keeps water inside the showering area — ideal for a wet room where the slope of the floor doesn’t drain water away quickly enough on its own.
It’s just as useful along the edge of a bath — run it the full length of the bath or just the width of your screen to seal that awkward spot where a pivoting screen’s frame meets the glass — or beneath a shower enclosure, working alongside an over-the-glass seal to make the enclosure fully watertight.
Specification
| Colour | Black — also available in clear, white and grey |
| Material | Rigid acrylic |
| Lengths available | 800mm, 900mm, 1400mm, 2000mm, 2400mm or 2500mm — custom cutting service available |
| Fitting | Bedded down onto bathroom silicone |
| Sold as | Single length |
| Shape | Straight runs only — the rigid profile cannot be curved |
| Cutting down | Easily cut to length at home |
Why fit this seal
Keeps water where it belongs. A raised threshold stops water creeping out of a wet room, off a bath edge or under an enclosure, protecting flooring, skirting and the rooms below from slow water damage.
Three jobs, one profile. Wet room floors, bath edges under pivoting screens, and shower enclosures — the same simple barrier solves all three of the most common leak points.
Simple, permanent fix. One bead of everyday bathroom silicone is all it takes to fix it down — no drilling, no special tools, no specialist adhesive.
Cut to size at home. Order the next length up and trim it down for an exact fit, or use our custom cutting service and it arrives ready to fit.
Fitting in three steps
1. Measure. Measure the full run you need to seal — across the wet room opening, along the bath edge or beneath the enclosure.
2. Choose. Pick the nearest length at or above your measurement; it’s easy to trim down once it arrives.
3. Fit. Run a continuous bead of bathroom silicone where the seal will sit, press the seal firmly into place, and leave the silicone to cure before showering.
Not sure it fits?
Email a photo of your old seal or your measurements to sales@industrial-polymers.co.uk and our UK team will confirm the right profile and length before you order — usually the same working day. Please note this rigid seal suits straight runs only.
Complete the job
Fitting or fixing a shower door? These usually go in the same basket:
Not sure this seal fits? Shop by your glass thickness:
Request a quote
Fast, no-obligation price from our UK team for:Black Wet Room Threshold Seal - 800mm to 2500mm
