Vertical Frame Channel Seal - Flair Doors, 900mm or 2000mm

What this seal is

A clear vertical channel seal made from a combination of soft PVC — similar in feel to silicone or rubber — and rigid PVC T-sections, so it flexes where it needs to seal but holds its shape where it fits the frame. Based on feedback from previous customers, it's normally used vertically on some Flair shower doors, although it may also be found on others.

It fits in place of your existing seal on the door frame, closing the vertical join so water stays inside the enclosure every time you shower.

Specification

Why fit this seal

Stops leaks at the vertical join. A perished or shrunken vertical seal lets water escape down the edge of the door — a fresh seal closes the join and protects your bathroom floor.

Likely match for Flair doors. Customers tell us this is the profile found vertically on some Flair shower doors — compare it with your old seal and it should fit straight in its place.

Durable two-part construction. The soft PVC blade seals snugly while the rigid T-sections keep the seal seated firmly in the frame.

Easy to cut down. Trim the 900mm or 2000mm length to your door with secateurs or a junior hacksaw — or let us cut it for you.

Fitting in three steps

1. Measure. Measure the length of your old seal and compare its profile with the product photos.

2. Choose. Pick the 900mm or 2000mm length at or above what you need; trim at home or add our custom cutting service.

3. Fit. Remove the old seal, clean the frame, then fit the new seal in its place along the vertical edge.

Not sure it fits?

Email a photo of your old seal or your measurements to sales@industrial-polymers.co.uk and our UK team will confirm the right profile before you order — usually the same working day.