White Line Marking Paint for Car Parks & Warehouse Floors

Oil-based white line-marking paint for parking bays, warehouse routes, boundary lines and other organised floor layouts on compatible, correctly prepared surfaces. The white variants provide a clear contrast on many darker floors for indoor and outdoor marking work.

Key specification

Surface compatibility

The supplier specifically excludes asphalt and power-floated floors. Confirm the substrate before ordering and test adhesion on previously coated, sealed, dense or highly polished surfaces. Surface preparation and any required primer must suit the actual floor construction.

Preparation and application

• Remove dust, loose material, oil, grease and other contamination.
• Allow new concrete to mature fully and seal or prime it where the coating system requires.
• Set out the line using an appropriate guide, stencil or masking method.
• Apply an even coat by brush or roller and avoid cold, damp conditions.
• Do not return the area to traffic until the marking has dried and cured sufficiently.

Coverage planning

The stated 6–8 m² per litre is painted-area coverage. As a theoretical guide, it is equivalent to approximately 60–80 linear metres of a 100 mm-wide line per litre before allowing for porosity, texture, overlap and application losses.

Storage and safety

Keep the container securely closed and store away from ignition sources. Follow the current label and safety data for ventilation, personal protective equipment, thinning, cleaning and disposal.

Application imagery is illustrative. Screen colours are not an exact colour standard.