Products – Page 57

For Help or to Order over the Phone

+44 1282 277786

Free Shipping On All UK Orders

sales@industrial-polymers.co.uk

Showing 1345 - 1368 of 2545 products

Cropped close-up of a natural off-white acetal rod on white, angled cut end low in the frame

Natural white acetal rod on a workbench with rolled drawings and callipers by a window

Natural Acetal Plastic Rod - 5mm To 75mm Dia.

From £15.32 inc VAT

Grey-gloved hands supporting a long white acetal rod indoors, broad round cut end towards the camera

Translucent milky acetal rod on white, angled with its softly lit round cut end to the left

Natural Acetal Rod 12–250mm | Precision Machining Plastic

From £10.58 inc VAT

Gloved hands tilting a large matt white acetal panel in a bare concrete workshop, square-cut edge to the front

Square off-white acetal sheet angled on a plain white background, thin square-sawn edge catching the light

Natural Acetal Sheet 2–70mm | Precision Machining Plastic

From £19.99 inc VAT

Thin white acetal sheet angled on white, one long sawn edge running across the frame

Pale grey-white acetal panel lying square-on against a white ground, slim sawn edge along two sides

Natural Acetal Sheet for Engineering Applications 2mm to 40mm thick

From £10.76 inc VAT

Thick white acetal slab on white, deep square-sawn edge along the front

Thick natural white acetal slab on a machine shop bench with a milled acetal gear and bush cut from it, swarf and measuring tools around

Natural Acetal Sheet for Food Production & Engineering (Multiple Sizes) 50mm to 70mm thick

From £152.14 inc VAT

Thin square cream nylon sheet angled on white, slim cut edge just visible

Slim ivory cast nylon panel supported at both edges by black gloves, grey workshop out of focus

Natural Cast Nylon 6 Sheet for Engineering Applications 1mm to 12mm thick

From £4.40 inc VAT

Grey-gloved hands cradling a long white Delrin rod tapering away, wide cut end nearest the camera

Short milky-white Delrin rod resting on white, lit from above with the cut end at the lower left

Natural Delrin Rod 10–200mm | Precision Machining Plastic

From £10.56 inc VAT

Grey-gloved hands holding a thick white HDPE rod against a pale wall, brushed end face to the right

Off-white HDPE rod lying diagonally on white, softly shadowed with the round cut end at lower left

Natural HDPE Rod 10–300mm | Impact-Resistant Polyethylene

From £10.28 inc VAT

Grey knit gloves tilting a bright white HDPE panel in a workshop, concrete floor and pale doorway behind

Square translucent milky-white HDPE slab angled on white, satin face and a clean square-cut edge

Natural HDPE Sheet 1–60mm | Impact-Resistant Polyethylene

From £10.54 inc VAT

Ten natural translucent LDPE push-in plugs arranged in a triangle on white, domed heads facing up, low angle

Natural LDPE Domed Push-In Plug

£17.95 inc VAT

Grey-gloved hands cradling a large cream nylon rod, round cut end to the right, warehouse behind

Short ivory nylon rod angled on white, satin sheen and a round cut face at the lower left

Natural Nylon 6 Rod 10–300mm | Wear-Resistant Engineering Plastic

From £11.04 inc VAT

Black gloves holding a thin cream nylon 6 panel level in a pale workshop, bench blurred behind

Square ivory nylon 6 sheet angled on white, glossy cream face and a thin square-cut edge

Natural Nylon 6 Sheet 1–100mm | Wear-Resistant Engineering Plastic

From £12.72 inc VAT

Cream ivory nylon 6.6 rod held in grey gloves, angled end face lit against a blurred workshop

Single cream nylon 6.6 rod offcut on a white background, showing its smooth cut end face

Natural Nylon 6.6 Rod 5–200mm | Wear-Resistant Engineering Plastic

From £10.20 inc VAT

Pale cream nylon rod shown large on white, matt satin surface and flat end face on the left

Smooth ivory nylon 6.6 rod held end-on in cream gloves, lathe chuck and swarf blurred behind

Natural Nylon 6.6 Rod for Engineering Applications 75mm to 200mm diameter

From £58.30 inc VAT

Grey knit gloves lifting a large cream nylon 6.6 panel in a workshop with blue benches behind

Square pale cream nylon 6.6 slab angled on white, matt face and a visible square-cut edge

Natural Nylon 6.6 Sheet 5–80mm | Wear-Resistant Engineering Plastic

From £47.64 inc VAT

Thick square cream nylon slab on white, deep square-cut edge on the two near sides

Thick cream nylon 6.6 slab on a machine shop bench beside a milled cream block cut from it, milling machine behind

Natural Nylon 6.6 Sheet for Food Compliance Applications 30mm to 80mm thick

From £233.18 inc VAT

Off-white nylon slab angled on white, moderate sawn edge running across the front

Cream nylon 6.6 sheet on a workbench with two flat wear strips cut from it and a steel rule, tool board behind

Natural Nylon 6.6 Sheet for Food Production 5mm to 25mm thick

From £47.64 inc VAT

Two grey-gloved hands steadying a white PET rod over a steel bench, brushed cut end to the camera

Short white PET rod offcut standing on white, satin surface and round cut face at the lower left

Natural PET Rod 16–60mm | Dimensionally Stable Plastic

From £11.88 inc VAT

Grey-gloved hands carrying a long white polypropylene rod on a yard floor, cut end face forward

Milky white polypropylene rod running off the frame on white, round cut end at the lower left

Natural Polypropylene Rod 12–300mm | Chemical-Resistant Plastic

From £11.20 inc VAT

Gloved hands carrying a large white polypropylene panel flat in a workshop, blue benches and tiled wall behind

Square white polypropylene sheet angled on a plain white background, thin square-cut edge along the near side

Natural Polypropylene Sheet 1–50mm | Chemical-Resistant Plastic

From £22.99 inc VAT

Grey-gloved hands holding a long translucent PVDF rod indoors, oval cut end nearest the camera

Short milky PVDF rod on a white ground, angled with a faintly translucent cut end at lower left

Natural PVDF Rod 10–100mm | Chemical-Resistant Fluoropolymer

From £13.68 inc VAT

Grey knit gloves holding a large milky-white PVDF panel edge-on against a white brick wall

Square milky-white PVDF slab lying flat and angled on white, thin square edge at the near corner

Natural PVDF Sheet 1–20mm | Chemical-Resistant Fluoropolymer

From £48.34 inc VAT

Bright white UHMWPE rod supported by grey gloved hands, smooth rounded end face in the foreground

Translucent white UHMWPE rod section on a white background, angled to show the cut end

Natural UHMWPE Rod 20–200mm | Ultra Wear-Resistant Plastic

From £12.00 inc VAT

Black gloves holding a bright white panel on edge, workbenches blurred behind

Square milky-white panel angled on white, thin square edge running along the near side

Natural UHMWPE Sheet 5–80mm | Ultra Wear-Resistant Plastic

From £20.42 inc VAT

Previous Page 57 / 107Next

Over 1,000 products

Plastics, seals, matting & more

Trade & bulk orders

Volume quotes available on request

Easy returns

See our returns policy for details

All major cards accepted

Credit & debit cards welcome