MGB

18 products

Showing 1 - 18 of 18 products

Showing 1 - 18 of 18 products
View
Black flocked outer waist strip profile shown end-on against white backgroundMGB Midget flocked outer waist strip, cross-section drawing with mm dimensions
Flocked Outer Waist Strip – Fits MG MGB & Midget – PVC with Flocked Lip, Black – Per Metre (Supplied in 1 m Lengths)
£18.10 inc VAT
Black sponge rubber seal with side flange, cut end showing hollow boreMG MGB bonnet and radiator sponge seal, our cross-section drawing with 24 x 14.5 mm dimensions
Bonnet & Radiator Sponge Seal – Fits MG MGB – EPDM Sponge, Black, 24 x 14.5mm – Per Metre
£21.55 inc VAT
MGB GT inner tailgate seal, our cross-section drawing with 10 x 20 mm dimensionsMGB GT inner tailgate seal, what you get and fitting steps panel
Inner Tailgate Seal – Fits MG MGB GT, MGC GT & MGB GT V8 – EPDM Sponge on Dense Base, Black – Per Metre
£12.40 inc VAT
Round hollow sponge bulb above a metal-lined grip channel, black co-extruded trim, close-up on whiteMG, Mini and Land Rover self-grip top bulb boot seal, cross-section drawing with mm dimensions
Self-Grip Boot Seal with Top Sponge Bulb – Fits MG, Mini, Land Rover & Triumph Spitfire/GT6 (1.6-3 mm Panels) – EPDM & Metal Insert, Black – Per Metre
£10.35 inc VAT
Black rubber self-grip seal with round sponge bulb and U-shaped gripping channelMG and Triumph Stag self-grip top bulb boot seal, cross-section drawing with mm dimensions
Self-Grip Boot Seal with Top Sponge Bulb – Fits MG & Triumph Stag, 1-2 mm Panels – EPDM & Metal Insert, Black – Per Metre
£9.75 inc VAT
MGB self-grip side bulb door seal, cross-section drawing with sizes in mmMGB self-grip side bulb door seal, what you get and fitting steps
Flexible Self-Grip Side Seal with Sponge Bulb – Fits MGB Doors & Universal 1.6-3mm Panels – PVC Grip & Sponge, Black – Per Metre
£12.15 inc VAT
MGB GT rear screen rubber, laid out on a workshop benchMGB GT rear screen rubber, illustrative section showing glass channel, filler groove and flange channel
Rear Screen Rubber – Fits MG MGB GT – Moulded EPDM, Black, Takes LF1B or PT02 Filler – Each
£53.85 inc VAT
MGB Roadster windscreen frame to body seal, cut end showing the bulb and T-foot profileMGB Roadster windscreen frame to body seal, our profile drawing with mm dimensions
Windscreen Frame to Body Seal, 1.4 m Length – Fits MGB & MGC Roadster (1962–1980) – EPDM, Black – Each
£31.66 inc VAT
Rover V8 thermostat bypass hose, laid on a workshop benchRover V8 thermostat bypass hose, close-up of the bend and reinforced cut end
Thermostat Bypass Hose – Fits Carb V8: Defender (1983–2006), Discovery 1, Range Rover Classic, SD1, TR8 & MGB V8 – Kevlar-Reinforced EPDM, Black – Each
£20.28 inc VAT
MGB heater to valve hose, laid on a workshop bench showing its offset bendMGB heater to valve hose, close-up of the black EPDM surface and open end
Heater to Valve Hose – Fits MG MGB GT & Roadster (1963-1980) – EPDM with Kevlar Reinforcement, Black – Each
£7.65 inc VAT
MGB Roadster front windscreen seal, one-piece loop laid on a workshop benchMGB Roadster front windscreen seal, illustrated loop outline and specification
Front Windscreen Seal – Fits MGB Roadster (1962-1980) – EPDM, Black – Each
£47.15 inc VAT
MGB 4-cylinder heater hose, straight length laid on a workshop benchMGB 4-cylinder heater hose, close-up of the cut end and wall
Heater Hose – Fits MGB 4-Cylinder (up to Sept 1976) – EPDM with Kevlar, Black – Each
£26.12 inc VAT
Seat diaphragm panel fitted into a car seat frame with metal hooks visibleMG MGB and Midget seat diaphragm AHA7878, our drawing with spec table
Seat Diaphragm with 10 Hooks – Fits MG MGB & MGB GT (1962–69), MGC & Midget (to 1969) – Black EPDM – Each
£54.78 inc VAT
MG Midget and MGB fuel hose, close-up of a coil showing the textured cover and cut endMG Midget and MGB fuel hose, illustrative wall section with Kevlar layer
Fuel Hose (CDU2283M) – Fits MG Midget 1500 & MGB – EPDM with Kevlar, E10 Compatible, Black – Per Metre
£27.95 inc VAT
MGB 4-cylinder top radiator hose, laid flat on a workshop benchMGB 4-cylinder top radiator hose, close-up of the rubber and hose end
Top Radiator Hose – Fits MG MGB 4-Cylinder (1976 Onwards) – Kevlar-Reinforced EPDM, Black – Each
£18.35 inc VAT
Coiled length of black self-grip rubber seal showing hollow bulb and sponge profileDX71 self-grip side bulb seal, section drawing with 24 mm width, 15 mm grip and R8 bulb
Self-Grip Side Bulb Seal (DX71) – Fits 1.6–3mm Panels, MG, MGB, Mini & More – EPDM with Metal Insert, Sponge Bulb, Black – Per Metre
£10.35 inc VAT
MGB fuel pump HARDI 9912X, illustrative side view with blue cap and banjo unionsMGB fuel pump HARDI 9912X, what you get and how it fits
Electric Fuel Pump HARDI 9912X – Fits MG MGB (1964 on), MGB GT, MGB GT V8, MGC & MGC GT – Negative Earth – Each
£255.10 inc VAT
MGB bottom radiator hose GRH641, moulded hose with heater branch on a workshop benchMGB bottom radiator hose GRH641, our drawing of the hose wall layers and shape
Bottom Radiator Hose with Heater Branch (GRH641) – Fits MGB (Sept 1976–1980) – EPDM with Kevlar, Black – Each
£25.30 inc VAT

Our Clients

Recently viewed