Triumph

180 products

Showing 1 - 24 of 180 products

Showing 1 - 24 of 180 products
View
Triumph TR6 grille badge insert, black enamel with chrome TR6 lettering, studio photoTriumph TR6 grille badge insert, illustrative front-view drawing with callouts
Grille Badge Insert – Fits Triumph TR6 – Black Enamel with Chrome Lettering, OE 625662 – Each
£102.94 inc VAT
Morris Minor front seat adjusting block, close-up on a workshop mat showing the split and boreMorris Minor front seat adjusting block, illustrative end view drawing with callouts
Front Seat Adjusting Block – Fits Morris Minor 1000, Triumph Herald & Vitesse – EPDM Rubber, Black – Each
£9.78 inc VAT
Triumph TR5 TR6 hood seal, cross-section drawing with mm dimensionsTriumph TR5 TR6 hood seal, what you get and fitting steps
Hood Seal – Fits Triumph TR5 & TR6 – EPDM, Black – Per Metre
£14.20 inc VAT
Black bulb-shaped hood seal profile with T-section fixing base, studio shotTriumph Spitfire hood seal, cross-section drawing with mm dimensions
Hood Seal – Fits Triumph Spitfire MKIV & 1500 (1970–1980) – EPDM, Black – Per Metre
£16.98 inc VAT
Triumph Stag and 2000 clutch/brake pedal rubber, laid flat on a workshop benchTriumph clutch/brake pedal rubber, close-up of the ribbed tread and moulded emblem
Clutch/Brake Pedal Rubber – Fits Triumph Stag, 2000, 2500 & Toledo (Manual, OEM 150879) – Black EPDM – Each
£8.75 inc VAT
Triumph Dolomite accelerator pedal rubber, close-up of the ribbed tread and emblem on a workshop matTriumph Dolomite accelerator pedal rubber 152165, our plan-view drawing
Accelerator Pedal Rubber – Fits Triumph Dolomite 1300, 1500, 1850 & Sprint (OEM 152165) – Black EPDM – Each
£28.33 inc VAT
Triumph Stag differential mounting cone, blue polyurethane cone on a workshop benchTriumph differential mounting cone, illustrative half-section drawing
Differential Mounting Cone – Fits Triumph 2000, 2500, Stag & TR4 – Polyurethane, Blue – Each
£16.83 inc VAT
Triumph differential mounting cup bush, blue polyurethane cup on a workshop benchTriumph differential mounting cup bush 134236, our cut-away drawing
Differential Mounting Cup Bush – Fits Triumph 2000, 2500, Stag & TR4 – Polyurethane, Blue – Each
£24.45 inc VAT
Triumph Dolomite and Toledo front windscreen rubber, close-up of the black EPDM seal on a workshop matTriumph Dolomite and Toledo front windscreen rubber, illustrative cross-section with chrome insert groove
Front Windscreen Rubber – Fits Triumph Dolomite (1972–80) & Toledo (1970–76) – EPDM, Black – Each
£87.55 inc VAT
Black rubber door seal with hollow bulb and flat fixing foot, studio shotTriumph Stag hood seal section, our cross-section drawing with mm dimensions
Hood Seal Section – Fits Triumph Stag – Black EPDM, 18.5 x 22 mm – Per Metre
£16.20 inc VAT
Triumph TR4-TR6 tunnel seal strip 18mm, our cross-section drawing with 19 x 4 mm figuresTriumph TR4-TR6 tunnel seal strip 18mm, what you get and how it fits
Gearbox Tunnel Seal Strip, 18mm – Fits Triumph TR4, TR5 & TR6 – Expanded EPDM Sponge, Black – Each (1.3m Length)
£5.23 inc VAT
Triumph TR4-TR6 tunnel seal strip 30mm, our cross-section drawing with 29.5 x 6 mm figuresTriumph TR4-TR6 tunnel seal strip 30mm, what you get and how it fits
Gearbox Tunnel Seal Strip, 30mm with Raised Edges – Fits Triumph TR4, TR5 & TR6 – Expanded EPDM Sponge, Black – Each (2m Length)
£16.65 inc VAT
Black ridged rubber gearbox linkage bush, angled studio shot on standGearbox selector linkage bush fitted through a green Triumph's bodywork
Gearbox Selector Remote Linkage Bush – Fits Rover SD1 & Triumph TR7 – Each
£6.60 inc VAT
Round hollow sponge bulb above a metal-lined grip channel, black co-extruded trim, close-up on whiteMG, Mini and Land Rover self-grip top bulb boot seal, cross-section drawing with mm dimensions
Self-Grip Boot Seal with Top Sponge Bulb – Fits MG, Mini, Land Rover & Triumph Spitfire/GT6 (1.6-3 mm Panels) – EPDM & Metal Insert, Black – Per Metre
£10.35 inc VAT
Black rubber self-grip seal with round sponge bulb and U-shaped gripping channelMG and Triumph Stag self-grip top bulb boot seal, cross-section drawing with mm dimensions
Self-Grip Boot Seal with Top Sponge Bulb – Fits MG & Triumph Stag, 1-2 mm Panels – EPDM & Metal Insert, Black – Per Metre
£9.75 inc VAT
Triumph Herald and Vitesse fuel sender unit cover, close-up on a workshop mat showing the dome and wire holeTriumph Herald and Vitesse fuel sender unit cover, plan and edge view drawing
Fuel Sender Unit Cover – Fits Triumph Herald & Vitesse – Black Nitrile Rubber, OE 123286 – Each
£32.35 inc VAT
Triumph Herald and Vitesse seat diaphragm, laid flat on a workshop bench with its fitting hooksTriumph Herald and Vitesse seat diaphragm, plan view drawing with labelled features
Seat Diaphragm with Fitting Hooks – Fits Triumph Herald & Vitesse – Black EPDM Rubber, OE 569444 – Each
£56.60 inc VAT
Black windscreen rubber seal profile with locking bead, studio white backgroundTriumph Herald front windscreen rubber, illustrative cross-section with spec table
Front Windscreen Rubber – Fits Triumph Herald & Vitesse – Black EPDM – Each
£115.18 inc VAT
Triumph Herald fuel filler neck seal, black rubber grommet on a workshop benchTriumph Herald fuel filler neck seal, close-up of the collar and flange
Fuel Filler Neck Seal (Grommet) – Fits Triumph Herald & Vitesse – Black Nitrile – Each
£30.45 inc VAT
Triumph Herald 13/60 inlet manifold water hose 214412, shaped hose on a workshop benchTriumph Herald 13/60 inlet manifold water hose 214412, labelled side-view drawing
Inlet Manifold Water Hose, Heater Outlet (214412) – Fits Triumph Herald 13/60 – EPDM with Kevlar, Black – Each
£26.60 inc VAT
Triumph Herald 13/60 inlet manifold water hose 214411, shaped hose on a workshop benchTriumph Herald 13/60 inlet manifold water hose 214411, close-up of the bends and wall
Inlet Manifold Water Hose, Heater Inlet (214411) – Fits Triumph Herald 13/60 – EPDM with Kevlar, Black – Each
£20.80 inc VAT
Triumph Herald chrome windscreen insert PT11, cross-section drawing with 7.50 mm face and 7.00 mm depthTriumph Herald chrome windscreen insert PT11, what you get and how it fits
PVC Chrome Windscreen Insert PT11 – Fits Triumph Herald, Toledo, Dolomite & TR4/TR5/TR6 – Chrome-Faced PVC – Per Metre
£25.83 inc VAT
Black outer waist seal profile with metal reinforcing insert, studio shotTriumph Spitfire outer waist seal, cross-section drawing with 14 mm leg and metal insert
Outer Waist Seal – Fits Triumph Spitfire – EPDM with Metal Reinforcement, Black, 745mm – Each
£26.43 inc VAT
Coiled black dual-hardness hood seal with curved sealing lip, studio shotTriumph Spitfire hood seal, our cross-section drawing: dual hardness, 28 x 23.5 mm, 8 mm base
Hood Seal – Fits Triumph Spitfire – Dual-Hardness EPDM / Sponge Angle Section, Black – Per Metre
£17.40 inc VAT

Our Clients

Recently viewed