
Rubber & FoamSKU IP-EPDML-60X60X10-STD
Black EPDM Rubber L Profile – 60mm x 60mm x 10mm – 3m Length
This EPDM rubber L profile 60mm x 60mm x 10mm is a heavy-duty black angle trim with two equal 60mm legs, used to protect, seal and finish corners and exposed edges. It is sold as one 3m length that you cut to size on site.
At a glance
- Equal-leg rubber angle: 60mm x 60mm with a solid 10mm thickness
- Sharp 90° corner sits neatly over square edges and corners
- 70° Shore A EPDM: tough, flexible and impact absorbing
- Excellent UV, ozone and weather resistance for outdoor corners
- Works from -40°C to 120°C
- Supplied as a single 3m length
Typical uses
- Corner protection on loading docks, plinths, columns and kerbs
- Heavy-duty edge protection on sheet metal, glass and machinery
- Waterproof sealing strip along door and window corners
- Rubber edge trim on vehicles, caravans and rail bodywork
- Covering hazardous edges to reduce trip and knock injuries
- Stopping dirt and debris building up in corners
Which one do I need?
| EPDM L profile | Thickness | Best for |
| 38mm x 38mm, 3m | 6.3mm | Medium corners and edge trims |
| 50mm x 50mm, 4m | 5.5mm | Wider, lighter equal-leg corners |
| 60mm x 60mm, 3m (this item) | 10mm | Heavy impact protection on large corners |
| 100mm x 50mm, 4m | 7mm | Unequal angle: wide face with a short return |
Technical drawing
Specification
| Material | EPDM rubber |
| Colour | Black |
| Profile | Equal-leg L (angle) section |
| Leg size | 60mm x 60mm |
| Thickness | 10mm |
| Length | 3m |
| Hardness | 70° Shore A |
| Operating temperature | -40°C to 120°C |
| Tensile strength | 9 MPa |
| Elongation at break | 275% |
| Compression set | 22.5% (22 h at 70°C) |
| Tolerance class | ISO 3302-1 E2 - L2 |
| Unit of sale | One 3m length |
How much do I need?
Measure every corner or edge you want to cover and round up to whole 3m lengths. Example: four loading bay plinths, each with two 1.2m exposed corners, need 8 x 1.2m = 9.6m. Allowing a little for trimming, that is four 3m lengths (12m).
Fitting tips
- Clean, dry and degrease the corner before bonding.
- Cut with a sharp knife, heavy shears or a fine-toothed saw; mark the cut square with a set square.
- Run a continuous bead of polyurethane or silicone sealant along both inner faces for a permanent fix.
- On high-impact corners, add mechanical fixings through the legs as well as adhesive.
- Leave the adhesive to cure fully before the corner sees traffic.
Complete your project
- L-Section Rubber Profile, 38 x 38mm Equal Leg, 6.3mm Wall – Black EPDM – 3m Length
- Angle Rubber Profile – 15.5 x 16.5mm L Section – EPDM, Black – Per Metre
- Angle Rubber Extrusion – 9.5 x 5mm Small L Section – EPDM, Black – Per Metre
Questions
Can this rubber angle be used outdoors?
Yes. EPDM resists UV, ozone and weathering, so it suits exposed dock edges, kerbs and building corners.
How do I cut a 10mm thick L profile?
A sharp utility knife with several passes, heavy-duty shears or a fine-toothed saw all work. A mitre block helps with neat 45° joints.
Do I need to glue it?
For permanent corner protection, yes: bond it with polyurethane or silicone sealant, and add screws on heavy-impact areas.
Is it the same on both legs?
Yes, both legs are 60mm and 10mm thick. If you need a wide face with a short return, choose the 100mm x 50mm L profile.
Is EPDM recyclable?
Yes, this EPDM rubber edge protector is recyclable.
Need help choosing the right rubber L profile or corner protector? Contact our team and we will help you pick the right size.
Product details
| SKU | IP-EPDML-60X60X10-STD |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Black EPDM Rubber L Profile – 60mm x 60mm x 10mm – 3m Length