
Rubber & FoamSKU IP-EPDMDH-16X17-12M
EPDM Dual Hardness Door Seal – 16mm x 17mm – 12m to 49m or 50m Coil
Price shown updates with the option you pick.
A black EPDM door seal that combines two hardnesses in one extrusion: a firm 70 Shore A solid foot that you bond to the frame, and a soft 40 Shore OO sponge lip with a hollow slot that folds over when the door closes. The profile is 16 mm wide and 17 mm tall overall. It suits closing doors, hatches and quarter-light frames on classic cars, caravans, buses and other vehicles, as well as enclosure and cabinet doors that need a soft, weatherproof seal.
At a glance
- Size: 16 mm wide × 17 mm tall overall; solid foot 9.5 mm wide × 6 mm high
- Dual hardness: solid EPDM foot (70 Shore A, 65–75 IRHD) keeps the line straight; expanded EPDM sponge lip (40 Shore OO) compresses easily
- Hollow slot through the lip lets it fold and close up under light door pressure, so it seals against uneven panels
- Weatherproof: rated excellent for ozone, weather and UV; flexible at −40 °C
- Lengths: any whole length from 12 m to 49 m, a 50 m full coil, or 100 m as two 50 m coils
- In stock for same-day dispatch on orders placed before the cut-off
Technical drawing

Specification
| Property | Value | Test method / condition |
|---|---|---|
| Profile and supply | ||
| Overall width | 16 mm | Maker's profile drawing (nominal) |
| Overall height | 17 mm | Maker's profile drawing (nominal) |
| Solid foot (base) width | 9.5 mm | Maker's profile drawing; one maker table rounds this to 10 mm |
| Solid section height | 6 mm | Maker's profile drawing |
| Sponge lip | Leans to one side, with a slanted hollow slot (slot size not stated) | Maker's profile drawing |
| Dimensional tolerance | BS 3734 Class E3 | BS 3734 (extruded rubber profiles) |
| Colour | Black | Visual |
| Weight | About 0.1 kg per metre | Maker's product data |
| Lengths | 12 m to 49 m in 1 m steps; 50 m full coil; 100 m (2 × 50 m coils) | Cut lengths are one continuous piece |
| Fixing | Bond the solid foot with a rubber-compatible adhesive (no tape fitted) | — |
| Solid EPDM foot | ||
| Hardness | 70 Shore A (65–75 IRHD) | Shore A durometer / IRHD |
| Tensile strength | 10 MPa | Maker's material data |
| Elongation at break | 500 % | Maker's material data |
| Tear strength | 50 kN/m | Maker's material data |
| Compression set | 21 % | 22 h at 70 °C |
| Ozone resistance | No cracks | 72 h, 40 °C, 22 pphm ozone, extended |
| Heat ageing: hardness change | 0 IRHD | 70 h at 70 °C |
| Heat ageing: tensile change | +9 % | 70 h at 70 °C |
| Heat ageing: elongation change | 0 % | 70 h at 70 °C |
| Expanded EPDM sponge lip | ||
| Hardness | 40 Shore OO | Shore OO durometer |
| Density | 0.5–0.9 g/cm³ | Maker's material data |
| Water absorption | 5 % maximum | Maker's material data |
| Compression set | 25 % maximum (datasheet); the maker's web page quotes 50 % | Datasheet: 24 h recovery. Web page: 22 h |
| Oven ageing | ±30 % | 7 days at 70 °C |
| Low-temperature flexibility | Pass | −40 °C |
| Ozone / weather / UV resistance | Excellent / excellent / excellent | Maker's rating |
| Mould growth resistance | Very good | Maker's rating |
| For guidance only | ||
| Service temperature | About −40 °C to +100 °C | Typical for EPDM, not tested on this profile. Tested points above: −40 °C flexibility and 70 °C ageing |
Sponge rubber is compressible, so sponge dimensions are approximate. Values are the maker's data for guidance and do not form a specification for a particular application.
Materials and compliance
Both parts are EPDM (ethylene propylene diene rubber): a dense solid compound in the foot and a closed-cell expanded compound in the lip. EPDM is well suited to outdoor use because it resists ozone, sunlight and weathering.
The maker states no food-contact, drinking-water (WRAS), fire-rating, REACH or RoHS approval for this profile, so we do not claim any. If you need a declaration for your project, ask us before ordering.
How it fits

- Clean the frame face with a solvent wipe so it is dry and free of grease, old adhesive and loose paint.
- Dry-fit the seal with the lip leaning towards the door, so the closing door folds the lip over rather than crushing it head-on.
- Run a thin bead of rubber-compatible contact adhesive or flexible cyanoacrylate along the frame and press the 9.5 mm solid foot onto it. Work in short sections.
- Lay the seal in without stretching it. Stretched sponge shrinks back and opens gaps at the joints.
- At a corner, ease the seal round a gentle radius, or mitre-cut and glue the two ends.
- Let the adhesive cure, then close the door and check for even contact all round.
How much do I need?
Measure all round the door or aperture where the seal will sit, add about 5 % for corners and trimming, and round up to the next whole metre. The minimum length is 12 m.
- Cut lengths cost £14.70 per metre (inc VAT): 12 m is £176.40, 20 m £294.00, 30 m £441.00.
- The 50 m full coil is £588.00 (£11.76 per metre). It costs the same as 40 m and less than any length from 41 m, so choose the coil if you need 40 m or more.
- 100 m is supplied as two 50 m coils for £1,176.00.
Data sheet
Download the technical data sheet (PDF, 2 pages): drawing and full property table
Frequently asked questions
Which way round does it fit?
Glue the narrow solid foot to the fixed frame and point the leaning sponge lip towards the door. As the door closes it pushes the lip over and the slot inside collapses, which gives a soft, even seal without heavy door pressure.
What gap does it seal?
The seal stands 17 mm proud of the frame. As a guide, it works best where the closed door sits roughly 8–14 mm from the frame face, so the lip is folded but not crushed flat. This is our guidance, not a maker rating; check against your own door before cutting the full length.
Is it suitable for classic car and caravan doors?
Yes. This dual hardness profile is widely used as a door and quarter-light seal on older vehicles, caravans, buses and trains. Compare its cross-section and sizes with your old seal or the frame before you order, as we do not list it against specific vehicle models.
Does it have a self-adhesive backing?
No. The solid foot is bonded with an adhesive. A rubber-compatible contact adhesive or a flexible cyanoacrylate gives a strong bond to clean painted metal, aluminium and GRP.
What temperatures and weather can it handle?
The sponge passes a −40 °C flexibility test, and the solid foot keeps its hardness after 70 hours at 70 °C. Typical EPDM service is about −40 °C to +100 °C (not tested on this profile). It is rated excellent for ozone, weather and UV, so it suits outdoor use.
How do I cut and join it?
Cut it square with a sharp trimming knife or fine-tooth shears; a wetted blade cuts sponge more cleanly. For a closed loop, butt-join the two ends with cyanoacrylate glued across the full face, or mitre the corners at 45°.
Will one long length arrive in one piece?
Yes. Every length from 12 m to 50 m is one continuous piece, coiled for delivery. The 100 m option comes as two 50 m coils.
Can I get a sample or a different length?
Contact our sales team on +44 1282 277786 or sales@industrial-polymers.co.uk for samples, longer runs or trade pricing.
Product details
| SKU | IP-EPDMDH-16X17-12M |
|---|---|
| Weight | 2.65 lb |
More from this range
Request a quote
Fast, no-obligation price from our UK team for:EPDM Dual Hardness Door Seal – 16mm x 17mm – 12m to 49m or 50m Coil