
Rubber & FoamSKU IP-EPDML-15.5X16.5-6M
EPDM L Profile – 15.5mm x 16.5mm, Rounded Top Edge – Black Rubber Angle Trim – Cut Length or 30m Coil
Price shown updates with the option you pick.
A heavy-section, solid black EPDM angle trim for guarding and finishing 90° corners. This L profile is 15.5 mm across the base and 16.5 mm high. The upright leg is a chunky 3.2 mm thick with a rounded top edge, and the base leg is 2.75 mm thick. It sits over the external corner of sheet-metal guards, tanks, cabinets, glass and panel edges, giving a cushioned, weather-proof edge that will not crack outdoors. Choose one continuous length from 6 m to 29 m, or a full 30 m coil. Every length is held in stock in the UK.
At a glance
- 15.5 × 16.5 mm L section: 3.2 mm upright leg with a radiused top, 2.75 mm base leg, square 90° inside corner.
- Solid EPDM, 75° IRHD: tensile strength 10 N/mm², elongation at break 415%, tear strength 12 kN/m.
- Wide service range: −40 °C to +120 °C, with very good resistance to weather, UV, ozone and ageing.
- Low compression set: 12.7% after 22 h at 70 °C, so it keeps its shape when clamped or bonded.
- Easy to fit: cut with a sharp knife or fine-tooth saw; bond with PU or silicone sealant where a fixed or sealed joint is needed.
- Any length from 6 m to 30 m: always one continuous piece. The 30 m full coil has the lowest price per metre.
Technical drawing

Specifications
| Property | Value | Test method / source |
|---|---|---|
| Profile | Solid L (angle) section, rounded top edge on the upright leg | Supplier drawing |
| Overall width (base leg) | 15.5 mm | Supplier drawing |
| Overall height (upright leg) | 16.5 mm | Supplier drawing |
| Upright leg thickness | 3.2 mm | Supplier drawing |
| Base leg thickness | 2.75 mm | Supplier drawing |
| Clear inner leg (base, from upright face) | 12.3 mm | Calculated from supplier dimensions |
| Clear inner height (upright, from base face) | 13.75 mm | Calculated from supplier dimensions |
| Dimensional tolerance | Class E2 | ISO 3302-1:2014 |
| Material | EPDM (ethylene propylene diene monomer), solid | Datasheet |
| Colour | Black | Datasheet |
| Hardness | 75° IRHD | BS 4255 |
| Density | 1.2 g/cm³ | BS 4255 |
| Tensile strength | 10 N/mm² (10 MPa) | BS 4255 |
| Elongation at break | 415% | BS 4255 |
| Tear resistance | 12 kN/m | BS 4255 |
| Compression set, 22 h at 70 °C | 12.7% | BS 4255 |
| Compression set, 22 h at 100 °C | 28% | BS 4255 |
| Service temperature | −40 °C to +120 °C | Supplier technical data |
| Weight | Approx. 0.10 kg per metre | Calculated from section area and density |
| Lengths | 6 m to 29 m in one piece, or 30 m full coil | — |
Materials and compliance
Made from solid black EPDM rubber, a synthetic elastomer chosen for outdoor work because it resists sunlight, rain, frost and ozone without hardening or cracking. Tolerances are to ISO 3302-1:2014 Class E2. The supplier does not state any food-contact (FDA, EC 1935/2004), drinking-water (WRAS) or REACH/RoHS approval in writing for this exact profile, so we do not claim one. If you need a certificate or declaration for your application, contact us before ordering and we will confirm what is available.
How it fits

- Measure the edge and add a little for trimming.
- Prepare both faces: clean off dust, grease and old adhesive and let them dry.
- Dry fit so the square inside corner of the L sits tight into the corner of the part, rounded edge outwards.
- Fix with a bead of polyurethane or silicone sealant on both inner faces if the trim must stay put or seal; some jobs need no adhesive at all.
- Finish the ends square, or mitre at 45° on outside corners and butt-join with a rubber-compatible cyanoacrylate adhesive.
Typical uses
- Protective edging on machine guards, tanks, sheet-metal enclosures and cabinet corners
- Edge protection for glass and acrylic panels
- Trim and finishing on caravans, motorhomes, classic cars, trains and boats
- Sealing gaps at the corners of doors, hatches and windows
- Softening sharp corners and step edges to reduce knocks and trip hazards
- Keeping dirt and debris out of corner joints
Price per metre
| Length | Price inc VAT | Per metre |
|---|---|---|
| 6 m to 29 m (one piece) | £154.62 to £747.33 | £25.77 |
| 30 m full coil | £579.60 | £19.32 |
The 30 m coil costs less than 23 m or more of cut length, so if you need over 22 m the coil is the better buy. Need more than one coil? Add several to your basket or ask us for a quote.
Frequently asked questions
What size corner does it fit?
Any external 90° corner. The 15.5 mm leg lies on one face and the 16.5 mm leg covers the other, leaving 12.3 mm and 13.75 mm of clear inner face. The part does not have to be a set thickness, so it suits thin sheet as well as thick panels.
How do I fix it in place?
For a permanent or watertight fit, run a bead of polyurethane or silicone sealant along both inside faces and press the trim home. For light-duty protection it may need no adhesive at all.
How do I cut and join it?
Cut with a sharp knife or fine-tooth saw against a straight edge. At an outside corner, mitre both pieces at 45° and join them with a cyanoacrylate (superglue-type) rubber adhesive.
Can it be used outdoors?
Yes. EPDM has excellent resistance to weathering, UV, ozone and ageing, so it suits caravans, vehicles, boats and exterior enclosures.
What temperatures will it take?
−40 °C to +120 °C in service.
How hard is it?
75° IRHD: firm enough to hold a crisp corner and take knocks, while still flexing round gentle curves.
Why is the top edge rounded?
The radiused edge on the 3.2 mm upright leg removes the sharp corner, so it is kinder to hands and clothing and looks neater as a finishing trim.
Is it oil resistant?
EPDM is not recommended for continuous contact with petrol, mineral oils or greases. For oily environments ask us about a nitrile or neoprene alternative.
How is it delivered?
Every length is one continuous piece, loosely coiled. Stock items are dispatched the same day on orders placed before the cut-off.
Need help choosing? Contact our team on +44 1282 277786 or sales@industrial-polymers.co.uk.
Product details
| SKU | IP-EPDML-15.5X16.5-6M |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:EPDM L Profile – 15.5mm x 16.5mm, Rounded Top Edge – Black Rubber Angle Trim – Cut Length or 30m Coil