
Rubber & FoamSKU IP-EPDMP-28.5X3.5-16
EPDM P Extrusion – 28.5mm x 3.5mm – Cut Length
Price shown updates with the option you pick.
This EPDM P extrusion 28.5mm x 3.5mm combines a wide, thin flat tail with a small solid round bead, giving a low-profile rubber P seal that closes small gaps with very little compression. It is sold as one continuous cut length, from 16m up to a full 30m coil, so choose the total length you need.
At a glance
- 28.5mm overall width with a 3.5mm solid (not hollow) bead
- Wide flat tail gives a large bonding area for adhesive or fixings
- Solid EPDM rubber with good weathering and UV resistance
- Hardness 65 to 75 Shore A: firm enough to hold its shape, soft enough to seal
- Light at about 0.06kg per metre, black finish
- Cut lengths from 16m to 29m, or a full 30m coil
Typical uses
- Low-profile weather seal on doors, windows and inspection hatches
- Rubber piping and edge trim on vehicle bodies and trailers
- Weatherstrip on marine hatches, lockers and cabin doors
- Light impact buffer and decorative finishing strip
- General indoor and outdoor sealing of small, even gaps
Which one do I need?
| Profile | Best for |
|---|---|
| 13mm x 2.5mm | Narrow rebates and small panels where space for the tail is tight |
| 19mm x 3mm | Piping between panels where a mid-width tail is enough |
| 28.5mm x 3.5mm (this seal) | Wide bonding surfaces needing a larger tail with a slightly bigger bead |
| 36mm x 5.5mm | Larger gaps that need a bigger solid bead |
Technical drawing
Specification
| Material | Solid EPDM rubber |
| Overall width (tail) | 28.5mm |
| Bead diameter | 3.5mm, solid |
| Hardness | 65° to 75° Shore A |
| Weight | 0.06kg per metre |
| Colour | Black |
| Supplied as | One continuous cut length, 16m to 29m, or a full 30m coil |
How much do I need?
Add up every run you need to seal. For example, a 600mm x 800mm hatch frame needs 2 x 0.6m + 2 x 0.8m = 2.8m, so a 16m length seals five such frames with spare for trimming. Order the total as one length to keep joins to a minimum; for 30m or more, the full 30m coil is the most economical choice.
Fitting tips
- Clean and degrease the bonding face before fitting so adhesive grips the full width of the tail.
- Fix the flat tail with a rubber-compatible contact adhesive or mechanical fixings, keeping the bead along the edge that meets the closing part.
- Lay the seal in place without stretching it, otherwise it can shrink back and open a gap at the ends.
- Cut square with a sharp blade and butt the ends tightly where two runs meet.
Complete your project
- EPDM P Extrusion – 27.7mm x 12.7mm – Cut Length
- EPDM P Profile Seal – 36mm Tail x 5.5mm Solid Bulb – Cut Length
- Solid EPDM P Extrusion – 13mm x 2.5mm Weather Seal – Per Metre
Questions
Is the bead hollow?
No. The 3.5mm bead is solid EPDM, which keeps the profile low and gives a firm, even contact line.
Can this rubber P seal be used outdoors?
Yes. EPDM resists weathering and UV, so it suits exterior doors, hatches and marine lockers as well as indoor work.
How is it fixed?
Bond the flat 28.5mm tail with a suitable rubber adhesive or hold it with mechanical fixings, depending on the surface.
What is the minimum I can order?
The shortest cut length is 16m. Longer lengths are supplied in one piece up to 29m, or choose the full 30m coil.
Not sure which seal suits your job? Contact our team with your gap size and surface and we will help you choose.
Product details
| SKU | IP-EPDMP-28.5X3.5-16 |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:EPDM P Extrusion – 28.5mm x 3.5mm – Cut Length