
Rubber & FoamSKU IP-EPDMU-12X11X4.75-6
EPDM U Channel – Black – 12mm x 11mm – For 4.75mm Panels – Cut Lengths
Price shown updates with the option you pick.
This EPDM U channel, 12mm x 11mm, is a solid black rubber edge trim with a 4.75mm slot that pushes onto panels around 4.75mm thick to cover sharp edges, absorb knocks and finish metal, glass, plastic and timber panels. It is sold as one continuous cut length from 6m to 30m.
At a glance
- 12mm wide x 11mm high with a rounded back and a 4.75mm slot about 7.4mm deep
- Made for panels around 4.75mm thick
- Solid EPDM, 65-75 Shore A, with 3.62mm walls
- Good weathering, abrasion, heat and cold resistance for indoor or outdoor use
- Light at about 0.09kg per metre
- Cut to your length, from 6m up to a full 30m
Typical uses
- Edge protection on sheet metal guards, covers and panels
- Edging for glass and acrylic panels around 4.75mm thick
- Door and hatch edge trim
- Edging on vending machine panels and stair edges
Which one do I need?
| U channel | Best for |
|---|---|
| 5mm x 7.5mm inside, 4.75mm panel | Smaller, lighter trim for the same panel thickness |
| 12mm x 11mm, 4.75mm slot (this product) | Rounded, chunkier edge that covers and cushions a 4.75mm panel edge |
| 5 x 19mm inside, 15 x 22mm overall | Deep 19mm grip on a 4.75mm panel |
| 17mm x 17mm solid EPDM | Heavier edge guard for panels 3mm to 6mm thick |
Technical drawing
Specification
| Profile | Round-backed U channel |
| Overall size | 12mm wide x 11mm high |
| Slot width | 4.75mm |
| Wall thickness | 3.62mm |
| Material | Solid EPDM rubber |
| Hardness | 65-75 Shore A |
| Tensile strength | 10 MPa |
| Elongation at break | 500% |
| Tear strength | 50 kN/m |
| Weight | 0.09kg per metre |
| Colour | Black |
| Unit of sale | One continuous length, 6m to 30m |
How much do I need?
Add up every edge to be trimmed and allow about 5% for mitres and trimming, then choose the next length up. Example: four 1200mm machine guard panels edged on three sides (1200 + 600 + 1200mm each) need 12m, plus 5% = 12.6m, so order the 13m length.
Fitting tips
- Check the panel is close to 4.75mm thick; a thinner panel can be packed with a thin strip bonded inside the slot.
- Clean the edge, then press the channel on by hand, working from one end.
- Mitre the trim at corners or ease it round large radii rather than stretching it.
- For a permanent or watertight fit, run a bead of polyurethane or silicone sealant into the slot first.
Complete your project
- U Channel 5mm x 7.5mm Inside – For 4.75mm Panel
- U Channel – Fits 4.75mm Panel, 5 x 19mm Inside
- Solid EPDM U Channel – 17mm x 17mm
Questions
What panel thickness does the 12mm x 11mm EPDM U channel fit?
It has a 4.75mm slot, so it suits panels around 4.75mm thick. Thinner panels can be packed with a strip bonded inside the slot.
Can this rubber edge trim be used outdoors?
Yes. EPDM resists weathering and abrasion and copes well with heat and cold.
How is it supplied?
As one continuous length cut to the size you choose, from 6m up to 30m.
Do I need adhesive?
It normally push-fits. For a permanent or sealed fit, bond it with a polyurethane or silicone sealant.
Need help choosing a size? Contact our team.
Product details
| SKU | IP-EPDMU-12X11X4.75-6 |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:EPDM U Channel – Black – 12mm x 11mm – For 4.75mm Panels – Cut Lengths