
Rubber & FoamSKU IP-TPEF-40X20-PLAIN
Hollow TPE D Fender – Black UV Resistant – 40mm x 20mm – 25m Coil
Price shown updates with the option you pick.
This hollow TPE D fender, 40mm x 20mm, is a compact, non-marking rubbing strip with a flat 40mm back and a hollow core that cushions knocks on boats, pontoons, loading bays and workplace edges. It is sold as one continuous 25m coil in black, with a plain back or a self-adhesive back.
At a glance
- Compact profile: 40mm across the flat back, 20mm high
- Hollow core flexes on impact and recovers its shape
- Non-marking black TPE, 60 Shore A
- Plain back for mechanical fixing, or adhesive back for quick fitting
- Good UV and weathering resistance, -40°C to +90°C
- 100% recyclable material
Typical uses
- Rubbing strip on small boats, tenders and pontoon edges
- Buffer strip on loading bay and dock edges
- Impact protection on walls, columns and workplace edges
- Tight spots where a full-size fender is too bulky
Which one do I need?
| Fender profile | Best for |
|---|---|
| 35mm x 25mm TPE protective D | Narrower back with a taller, rounder face |
| 40mm x 20mm hollow TPE D fender (this product) | Low, compact buffer with a hollow core; plain or adhesive back |
| 50mm x 30mm compact TPE D fender | Wider, deeper strip for heavier knocks |
| 60mm x 52mm hollow delta D fender | Deep marine fender for pontoons and small craft |
Technical drawing
Specification
| Profile | Hollow D fender with flat fixing back |
| Size | 40mm wide x 20mm high |
| Base wall | 4.5mm |
| Material | Thermoplastic elastomer (TPE) |
| Hardness | 60 Shore A |
| Density | 1.09 g/cm³ |
| Tensile strength | 7.8 MPa |
| Elongation at break | 700% |
| Operating temperature | -40°C to +90°C |
| Tolerance | ISO 3302-1 E2 / L2 |
| Backing | Plain or self-adhesive |
| Unit of sale | One 25m coil |
How much do I need?
Measure every edge to be protected and add about 5% for trimming and corners. Example: a 6m pontoon finger edged on both sides and the end (6m + 6m + 2m = 14m) needs 14.7m with 5% added, so one 25m coil covers it with spare for repairs.
Fitting tips
- For the adhesive-backed version, clean and degrease the surface first and press firmly along the full length.
- For the plain version, fix through the flat back with stainless screws and washers at regular centres; do not crush the hollow.
- Let the coil relax at room temperature before fitting so it lies straight.
- Cut with a sharp knife or fine-toothed saw for a clean, square end.
Complete your project
- Compact TPE D Fender – 50mm x 30mm – 25m Coil
- TPE Protective D Profile – 35mm x 25mm – 25m Coil
- Hollow TPE Delta D Fender – 60mm x 52mm – 10m Coil
Questions
Should I choose the plain or adhesive-backed 40mm x 20mm D fender?
Choose adhesive back for quick fitting to clean, smooth surfaces. Choose plain back where you will screw or bolt it on, or where the surface is rough or wet.
Will this TPE fender mark boats or vehicles?
No. The black TPE is non-marking, so it will not leave streaks on gelcoat or paintwork.
Can it stay outdoors?
Yes. TPE resists UV and weathering and stays flexible from -40°C to +90°C.
Is the fender solid or hollow?
Hollow. The core lets the face squash on impact and spring back, giving a softer buffer than a solid strip of the same size.
Need help choosing a size? Contact our team.
Product details
| SKU | IP-TPEF-40X20-PLAIN |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Hollow TPE D Fender – Black UV Resistant – 40mm x 20mm – 25m Coil