
Rubber & FoamSKU IP-CPR-500X55-5CH
Heavy-Duty Cable Protector – 5 Channel – 500mm x 55mm – 0.9m Length
This 5 channel heavy-duty cable protector, 500mm wide x 55mm high, keeps up to five separate cables or hoses apart and protected where they cross site roads, yards and walkways. Each 0.9m section has five 42mm x 38mm channels under a hinged high-visibility yellow lid, sloped rubber ramps and interlocking ends, and is sold individually.
At a glance
- Five separate 42mm wide x 38mm high channels
- 500mm wide x 55mm high overall, 0.9m long, 14.8kg per section
- Rated for vehicles up to 4.6 tonnes at walking pace (5mph)
- Hinged yellow PVC lid lifts open to lay cables in from above
- Interlocking ends join sections into a continuous run
- NR/SBR rubber body, UV stable, -45°C to +60°C
Typical uses
- Keeping power, data and air lines apart across a work yard
- Temporary event, festival and outdoor broadcast cable crossings
- Protecting several feeds across car park and site access routes
- Pedestrian walkways where trailing cables cause trip hazards
- Slowing light site traffic at a crossing point
Which one do I need?
| Protector | Choose it when |
|---|---|
| 1 channel, 320mm x 65mm | One thick cable or hose up to 52mm x 50mm, vehicles up to 12 tonnes |
| 3 channel lidded protector | Two or three separate feeds in one crossing |
| 5 channel, 500mm x 55mm (this item) | Up to five separate cables or hoses, each up to 42mm x 38mm |
Technical drawing
Specification
| Channels | 5 |
| Channel size | 42mm wide x 38mm high (each) |
| Overall width | 500mm |
| Overall height | 55mm |
| Section length | 0.9m |
| Weight | 14.8kg per section |
| Body | NR/SBR rubber blend, 85° Shore A |
| Lid | Yellow PVC, hinged |
| Load rating | 4.6 tonnes at up to 5mph |
| Temperature range | -45°C to +60°C |
| Unit of sale | Each (one 0.9m section) |
How much do I need?
Divide the width of the crossing by 0.9m and round up. A 4.5m wide access road needs 4.5 ÷ 0.9 = 5 sections; a 7m road needs 7 ÷ 0.9 = 7.8, so order 8.
Fitting tips
- Lay on firm, level ground swept clear of stones so the base sits flat.
- Give each cable its own channel and keep power and data apart.
- Push the interlocking ends firmly together before traffic crosses.
- Keep site traffic to walking pace over the protector.
Complete your project
- Heavy-Duty Cable Protector – 1 Channel – 320mm x 65mm
- 3 Channel Lidded Cable Protector
- Heavy Duty Cable Protector Ramp – 3 Channel Rubber, 980mm x 510mm
Questions
What size cables fit the 5 channel cable protector?
Each channel is 42mm wide and 38mm high, so a cable or hose up to about 38mm diameter fits in each one with the lid closed.
Can vans drive over it?
It is rated for vehicles up to 4.6 tonnes at no more than 5mph. For heavier vehicles choose a higher-rated protector.
Does it need fixing down?
No. It is loose-laid; its 14.8kg weight keeps each section in place for temporary crossings.
Can it stay outside?
Yes. The rubber body is UV stable and works from -45°C to +60°C.
Need help planning a cable crossing? Contact our team for advice.
Product details
| SKU | IP-CPR-500X55-5CH |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Heavy-Duty Cable Protector – 5 Channel – 500mm x 55mm – 0.9m Length