Rubber & FoamSKU IP-SPEX-50X25-STD
High Temperature Silicone P Extrusion – 50mm x 25mm – 10m Length
This high temperature silicone P extrusion 50mm x 25mm is a grey silicone seal with a 50mm flat fixing flange and a 25mm hollow bead, made for oven doors, dryers and hot enclosures that run continuously up to +270°C. It is sold as one 10m length.
At a glance
- 50mm overall width with a 25mm diameter hollow compression bead
- 3mm flange thickness for screw, clamp-strip or adhesive fixing
- Rated -60°C to +270°C constant, +300°C intermittent
- 60 Shore A grey silicone with good shape memory
- Weather and UV resistant for exposed equipment
- Supplied as a single 10m length, cut on site
Typical uses
- Industrial oven, kiln and dryer door seals
- Heat-treatment and curing cabinet doors
- Hot-air ducting access panels and inspection hatches
- Process enclosures where rubber or TPE would harden
- Large-gap door seals needing a deep, soft bead
Which one do I need?
Choose the bead size from the gap you need to close when the door is shut: the bead should compress by roughly a quarter to a third.
| Size | Best for |
|---|---|
| 35mm x 15mm | Smaller oven doors and panels with gaps of about 10-12mm |
| 42mm x 17mm | Medium gaps around 12-14mm, black silicone, 25m coil |
| 50mm x 25mm (this product) | Large doors and uneven frames with gaps of about 17-20mm |
Technical drawing
Specification
| Material | Silicone |
| Colour | Grey |
| Overall width | 50mm |
| Bead diameter | 25mm |
| Flange thickness | 3mm |
| Hardness | 60° Shore A |
| Temperature range | -60°C to +270°C constant |
| Intermittent maximum | +300°C |
| Tolerance class | ISO 3302-1 E2 – L2 |
| Unit of sale | One 10m length |
How much do I need?
Measure the full perimeter of the door or hatch and add about 5% for trimming and joints. Example: an oven door 1.8m high by 1.2m wide has a perimeter of 6.0m; adding 5% gives 6.3m, so one 10m length covers it with 3.7m left for a second, smaller door.
Fitting tips
- Degrease the frame and let it dry fully; silicone needs a silicone-compatible high-temperature adhesive or a mechanical fixing
- Fit the bead on the side that meets the door so it compresses, not shears, as the door closes
- Mitre the flange at corners and keep the bead continuous, or butt-join on a straight run
- Do not stretch the profile while fitting; lay it in and press down along the flange
Complete your project
- High-Temperature Silicone P Extrusion – 35mm x 15mm – 10m Roll
- Silicone P Extrusion – 42mm Flange x 17mm Bead – 25m Coil
- TPE P Extrusion – 65mm Flange, 25mm Bead – 25m Coil
Questions
What temperature can this silicone P seal take?
It is rated for continuous use from -60°C up to +270°C, with short peaks to +300°C, which suits most industrial ovens and dryers.
How do I fix the flange?
The 50mm flange can be screwed or riveted through, held under a clamp strip, or bonded with a high-temperature silicone adhesive.
What gap does a 25mm bead seal?
Aim for the closed door to compress the bead by about a quarter to a third, so gaps of roughly 17-20mm suit this size.
Is this the same as a food contact silicone P seal?
No. This is a general high-temperature grade; choose one of our food contact grade P extrusions where direct food contact is required.
Can I order more than 10m?
Yes, order several lengths and butt-join them on straight runs for long or multiple doors.
Not sure which profile suits your application? Contact our team with your gap size and working conditions and we will help you choose.
Product details
| SKU | IP-SPEX-50X25-STD |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:High Temperature Silicone P Extrusion – 50mm x 25mm – 10m Length