
Rubber & FoamSKU IP-CPRO-108X14-BLACK-1
Rubber Cable Protector – 108mm x 14mm, 2 Channel – Per Length
Price shown updates with the option you pick.
This rubber cable protector, 108mm x 14mm, is a low two-channel floor cover that keeps power and data cables safe and trip-free across offices, warehouses, server rooms and exhibition halls. Choose black or grey and buy it as a single length of 1m, 1.5m, 3m, 4.5m or 20m.
At a glance
- Low-profile rubber cable cover, 108mm wide x 14mm high
- Two channels, 30mm x 10mm and 20mm x 10mm, with a semi-rigid separator between them
- Separate power and data runs to help reduce electrical interference
- Snap-open base slit, so cables push in from below without threading
- Tough NR/SBR rubber, 75° Shore A, conductive and halogen free
- Fire tested to BS 476 Part 7 Class 3; gentle edges suit wheelchairs and trolleys
Typical uses
- Office floors and open-plan desks where cables cross walkways
- Server rooms and laboratories with mixed power and data runs
- Warehouse and workshop floors with foot and trolley traffic
- Exhibitions, events and public spaces needing a neat, safe floor cord cover
Which one do I need?
| Cable protector | Channels | Best for |
|---|---|---|
| Low profile cable protector 83mm x 14mm | Single small channel | One or two light cables under foot traffic |
| Rubber cable protector 108mm x 14mm (this one) | 30 x 10mm and 20 x 10mm | Power and data kept apart in offices and workshops |
| Industrial cable protector 180mm x 36mm | Larger heavy-duty channels | Thicker cables and vehicle or pallet-truck traffic |
Technical drawing
Specification
| Material | Natural rubber / SBR blend |
| Hardness | 75° ± 5° Shore A |
| Width x height | 108mm x 14mm |
| Channel sizes | 30mm x 10mm and 20mm x 10mm |
| Fire test | BS 476 Part 7 Class 3 |
| Conductivity | Conductive (tested to BS 903 Part C5) |
| Halogens | Halogen free, low smoke and fume |
| Colours | Black or grey |
| Unit of sale | One length of 1m, 1.5m, 3m, 4.5m or 20m |
How much do I need?
Measure the full width of the walkway or doorway the cables cross and add about 100mm each side so the ends sit clear of foot traffic. Example: a 2.6m wide corridor needs about 2.8m, so a single 3m length covers it in one piece. For long runs across a warehouse or exhibition hall, the 20m length avoids joints altogether.
Fitting tips
- Sweep the floor clean and dry first so the protector sits flat.
- Open the base slit and press power cables into one channel and data cables into the other.
- Butt lengths tightly together on long runs so there is no lip to trip over.
- Lay it at right angles to the direction of travel wherever possible.
Complete your project
- Low Profile Cable Protector – 83mm x 14mm NR/SBR – Per Length
- 3 Channel Lidded Cable Protector
- Pedestrian Cable Covers For Indoor & Outdoor Use
Questions
Can this 108mm x 14mm cable protector be used outdoors?
Yes. The rubber is UV stable for extended outdoor use.
Is the floor cable cover wheelchair friendly?
Yes. At only 14mm high with gently sloping edges, wheelchairs and trolleys pass over it easily.
How do I put the cables in?
Open the slit in the base and push the cables up into the channels; the rubber closes back around them.
Why are there two channels?
So power and data cables can run separately, with the semi-rigid separator between them helping to reduce interference.
Does it give off toxic fumes in a fire?
No. It is halogen free with low smoke and low fume emission.
Need help choosing a cable protector? Contact our team for advice.
Product details
| SKU | IP-CPRO-108X14-BLACK-1 |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Rubber Cable Protector – 108mm x 14mm, 2 Channel – Per Length