
Rubber & FoamSKU IP-NRSR-38X3.2-STD
Natural Rubber Strip – 38mm x 3.2mm Solid Black – 5m Coil
This natural rubber strip 38mm x 3.2mm is a solid black flat strip for gap filling, anti-chafe pads, packing and simple flat seals, sold as one continuous 5m coil.
At a glance
- Solid natural rubber, black
- 38mm wide x 3.2mm thick, flat rectangular section
- Sold as one 5m coil - order several coils for longer runs
- 70° Shore A hardness: firm yet flexible
- Good abrasion and tear resistance for a flat rubber packing strip
- Working temperature -20°C to +80°C
Typical uses
- Anti-chafe and anti-rattle pads between metal panels and brackets
- Gap filling and packing in enclosures, guards and fabrications
- Simple flat gaskets and edge seals bonded in place
- Wear strips on workbenches, jigs and fixtures
- General maintenance spares for engineering workshops
Which one do I need?
| Size | Best for |
|---|---|
| 25mm x 2.4mm | Narrow anti-chafe pads and small packing pieces |
| 38mm x 3.2mm (this strip) | General packing, wear strips and bonded flat seals on panels and benches |
| 51mm x 3.2mm | Wider pads, guard edges and larger gap filling |
| 63mm x 3.2mm | Wide wear strips and flat gaskets on bigger frames |
Technical drawing
Specification
| Material | Natural rubber |
| Colour | Black |
| Width | 38mm |
| Thickness | 3.2mm |
| Unit of sale | One 5m coil |
| Hardness | 70° Shore A |
| Tensile strength | 2.94 MPa |
| Elongation at break | 200% |
| Tear strength | 1.57 N/mm |
| Working temperature | -20°C to +80°C |
How much do I need?
Add up every run you need to line, then divide by 5 and round up. Lining the four edges of a 1.5m x 1m steel enclosure needs 5m, so one coil. Covering 12m of bench edge needs 12 ÷ 5 = 2.4, so order three coils and keep the spare for repairs.
Fitting tips
- Clean and degrease the mounting face before bonding.
- Cut square with a sharp trimming knife against a steel rule.
- Let the strip relax flat at room temperature before fitting to remove coil set.
- Bond with a contact adhesive or double-sided tape suited to natural rubber.
- Keep it away from oils, fuels and solvents, which swell natural rubber.
Complete your project
- 3mm Thick Solid SBR Rubber Strip
- Solid Silicone Rubber Strip – 60 Shore A
- Self-Adhesive Neoprene Sponge Strip 25 x 3mm
Questions
Is the 38mm x 3.2mm rubber strip sold per metre?
No. Each unit is one continuous 5m coil. Order more coils for longer runs.
Is this rubber strip suitable for outdoor use?
It handles water well, but long exposure to sunlight and ozone ages natural rubber. For outdoor sealing an EPDM strip is the better choice.
How do I fix the strip to a metal panel?
It is a plain flat strip with no grip or adhesive backing, so bond it with a contact adhesive or double-sided mounting tape.
Does natural rubber resist oil?
No. Avoid petroleum oils and fuels; it does resist water, alcohols and many dilute acids.
Need help choosing a strip? Contact our team.
Product details
| SKU | IP-NRSR-38X3.2-STD |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Natural Rubber Strip – 38mm x 3.2mm Solid Black – 5m Coil