
Rubber & FoamSKU IP-BFEN-60X14-BLACK
Neoprene B Fender – 60mm x 14mm Profile – 30.48m Coil
Price shown updates with the option you pick.
Neoprene B fender 60mm x 14mm is a low-profile rubbing strip with a punched stainless steel retaining strip already fitted, used to protect boat hulls, vehicle bodies, walls and shop fittings where space is tight. It is sold as a complete 30.48m coil in black or non-marking grey.
At a glance
- Low-profile B fender: 60mm wide x 14mm deep
- Grooved face spreads impact and hides scuffs
- 18/8 stainless steel retaining strip, 19.1mm wide and 0.7mm thick, punched and fitted
- Firm neoprene rubber, 70 Shore A, about 1.31kg per metre
- Black, or grey non-marking for walls and light-coloured surfaces
- Complete 30.48m coil
Typical uses
- Rubbing strake on small boats, tenders and workboats
- Side rubbing strip on trailers, trucks and ambulances
- Wall and stock protection in shops and storage areas
- Low-profile buffer along loading bay and factory walls
Which one do I need?
| Fender | Best suited to |
|---|---|
| Rubber B fender with lip 38mm x 19mm | Narrower strip with an overhang lip for small boats |
| Neoprene B fender 51mm x 25mm | Narrower but deeper, for more cushioning |
| Neoprene B fender 60mm x 14mm (this fender) | Wide, slim rubbing strip where space is tight |
| EPDM B fender with stainless strip 76mm x 32mm | Heavier section for larger boats and docks |
Technical drawing
Specification
| Profile | Low-profile B fender with grooved face |
| Size | 60mm wide x 14mm deep |
| Material | Neoprene rubber |
| Hardness | 70 Shore A |
| Retaining strip | 18/8 stainless steel, 19.1mm wide, 22 gauge (0.7mm), punched |
| Colours | Black; grey (non-marking) |
| Weight | 1.31kg per metre |
| Unit of sale | 30.48m coil |
How much do I need?
Measure each run and add about 5% for trimming. For example, fitting a rubbing strip to both sides of a 6m boat needs 2 x 6.2m (following the sheer) = 12.4m, and two 7m trailer sides add 14m: 26.4m plus 5% = 27.7m, which one 30.48m coil covers.
Fitting tips
- Unroll the coil and let it relax before measuring and cutting.
- Fix through the punched holes in the stainless strip with stainless steel screws to avoid corrosion.
- Warm the rubber gently to help it follow tight curves at the bow or corners.
- On boats, bed each fixing in marine sealant to keep water out of the hull.
Complete your project
- Neoprene B Fender – 51mm x 25mm – 18.28m Coil
- Rubber B Fender with Overhang Lip – 38mm x 19mm – 24.38m Coil
- EPDM Rubber B Fender with Stainless Steel Strip – 76mm x 32mm – 12m Roll
Questions
Is the retaining strip included?
Yes. The 18/8 stainless steel strip comes punched and already fitted inside the fender.
Which colour should I choose?
Grey is non-marking, so it suits light walls and hulls where scuff marks matter; black is the standard choice. Both give the same protection.
Can it be used outdoors?
Yes. Neoprene stands up well to weather and sea air, so it suits indoor and outdoor use.
How is it fixed?
Screw or nail through the pre-punched retaining strip; stainless steel screws are recommended.
Need help choosing a fender? Contact our technical team and we will be glad to advise.
Product details
| SKU | IP-BFEN-60X14-BLACK |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Neoprene B Fender – 60mm x 14mm Profile – 30.48m Coil