
Rubber & FoamSKU IP-RBF-38X13-BLACK
Neoprene Rubber B Fender – 38mm x 13mm – 36.57m Coil
Price shown updates with the option you pick.
This neoprene B fender 38mm x 13mm is a low-profile rubber rubbing strip with a punched stainless steel retaining strip already fitted in its centre channel, sold as one 36.57m coil in black or non-marking grey. At only 13mm high it protects boat sides, vehicle bodies, shop fittings and walls where a bulky fender would get in the way.
At a glance
- Low-profile B fender: 38mm wide x 13mm high, twin rounded lobes
- 18/8 stainless retaining strip, 13mm wide, 0.7mm thick, punched and pre-fitted
- Neoprene rubber, 70 Shore A, about 0.68kg per metre
- Black, or non-marking grey for gelcoat and paintwork
- Weather resistant for indoor or outdoor fitting
- One continuous 36.57m coil
Typical uses
- Rubbing strip on small boats, tenders and pontoon fingers
- Bump strip on vans, ambulances, trucks and trailers
- Edge protection on shop fittings, counters and store rooms
- Wall, door and stable protection in tight spaces
Which one do I need?
| B fender size | Best for |
|---|---|
| 38mm x 13mm (this product) | Low-profile protection where space is tight |
| 38mm x 19mm with lip | Small craft where a lip covers the deck joint |
| 51mm x 25mm | Medium craft and general rubbing strips |
| 60mm x 32mm with stainless strip | Heavy-duty pontoon and dock edges |
Technical drawing
Specification
| Profile | Low-profile B fender: twin lobes, central channel |
| Size | 38mm wide x 13mm high |
| Material | Neoprene rubber |
| Hardness | 70 Shore A |
| Weight | 0.68kg per metre |
| Retaining strip | 18/8 stainless steel, 13mm wide, 0.7mm (22 gauge), punched and fitted |
| Colours | Black; grey (non-marking) |
| Unit of sale | One 36.57m coil |
How much do I need?
Measure each run and add about 5% for cutting and corners. Example: a 7m boat needs a rubbing strip down both sides, about 14.5m, plus 5% = 15.2m; two boats use 30.4m, so one 36.57m coil of the 38mm x 13mm B fender covers both.
Fitting tips
- Fix through the punched holes in the strip with stainless screws to avoid corrosion.
- Start at one end and work along, keeping the fender straight and snug to the surface.
- Cut the rubber with a sharp knife and the strip with snips or a hacksaw; file the steel end smooth.
- Choose grey where black scuffs would show on white gelcoat or light paintwork.
Complete your project
- Rubber B Fender with Overhang Lip – 38mm x 19mm – 24.38m Coil
- Neoprene B Fender – 51mm x 25mm – 18.28m Coil
- EPDM Rubber B Fender – 60mm x 32mm with Stainless Steel Strip – 12m Roll
Questions
Is the stainless strip already fitted?
Yes. The 18/8 stainless steel strip comes punched and fitted inside the 38mm x 13mm fender, so you only need to screw through it.
Is the grey neoprene B fender non-marking?
Yes. The grey version is non-marking, so it suits white gelcoat, light paint and shop fittings.
Can it be used outdoors?
Yes. Neoprene stands up well to weather, sea air and sunlight, so it suits marine and vehicle use.
Is 13mm high enough to protect a boat?
For small craft, tenders and light knocks, yes. For heavier boats or pontoon edges choose the 51mm x 25mm or 60mm x 32mm size.
Not sure which size you need? Contact our team and we will be glad to help.
Product details
| SKU | IP-RBF-38X13-BLACK |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Neoprene Rubber B Fender – 38mm x 13mm – 36.57m Coil