
Rubber & FoamSKU IP-NEOU-6X13.5X1.6-8
Neoprene Round U Channel – 6mm x 13.5mm – For 1.6mm Panels – Black Rubber Edge Trim
Price shown updates with the option you pick.
A solid black neoprene (CR) round U channel that pushes onto 1.6 mm sheet and panel edges. The profile is 6 mm wide and 13.5 mm high. It has a 1.6 mm slot that is 10.5 mm deep, so it grips well down both faces of the sheet. That leaves a solid 3.0 mm rounded base over the cut edge, with 2.2 mm walls each side. The tall, deep-gripping section covers sharp metal, glass or plastic edges and takes heavy knocks. Choose any length from 8 m to 30 m in one continuous piece. It is in stock in the UK for same-day dispatch.
At a glance
- Fits: sheet and panels 1.6 mm thick (1.6 mm slot)
- Size: 6 mm wide × 13.5 mm high, 10.5 mm grip depth, 3.0 mm base over the edge, 2.2 mm walls
- Material: solid neoprene (polychloroprene, CR), 65 ± 5 IRHD, black
- Temperature: −15 °C to +90 °C working range (manufacturer datasheet)
- Strength: over 10 MPa tensile, 225 % elongation, 17.5 % compression set (22 h at 70 °C)
- Lengths: 8 m to 29 m in 1 m steps (£24.50/m), or a full 30 m coil at £21.24/m. The full coil costs less than any cut length of 27 m or more.
- Push-on fit with no tools. Good weathering, flex and abrasion resistance. It cuts cleanly with a knife and is 100 % recyclable.
Technical drawing

All dimensions are in mm and nominal, to ISO 3302-1:2014 Class E2. The 3.0 mm base is the 13.5 mm height minus the 10.5 mm slot depth. The 2.2 mm wall is (6 − 1.6) ÷ 2. The cross-section is drawn to true proportion but enlarged.
Specifications
| Property | Value | Test method / basis |
|---|---|---|
| Profile | Round-bottomed U channel with straight, parallel legs | Manufacturer drawing |
| Overall width | 6.0 mm | Manufacturer drawing |
| Overall height | 13.5 mm | Manufacturer drawing |
| Slot (channel) width | 1.6 mm | Manufacturer drawing |
| Slot depth (grip depth) | 10.5 mm | Manufacturer drawing |
| Wall thickness | 2.2 mm each side | Manufacturer data |
| Base thickness over the edge | 3.0 mm | Calculated: 13.5 − 10.5 mm |
| Panel thickness it fits | 1.6 mm | Manufacturer drawing and product data |
| Material | Solid neoprene, polychloroprene (CR) | Manufacturer datasheet |
| Colour | Black | Manufacturer datasheet |
| Hardness | 65 ± 5 IRHD (the product page gives 65 ± 5° Shore A) | IRHD, manufacturer datasheet |
| Density (specific gravity) | 1.44 ± 0.02 g/cm³ | Manufacturer datasheet |
| Tensile strength | > 10 MPa | Manufacturer datasheet; method not stated |
| Elongation at break | 225 % | Manufacturer datasheet; method not stated |
| Compression set | 17.5 % | 22 h at 70 °C, manufacturer datasheet |
| Heat ageing: hardness change | +3 IRHD | Air aged 70 h at 70 °C, manufacturer datasheet |
| Heat ageing: tensile strength change | ± 5 % | Air aged 70 h at 70 °C, manufacturer datasheet |
| Heat ageing: elongation change | ± 5 % | Air aged 70 h at 70 °C, manufacturer datasheet |
| Working temperature | −15 °C to +90 °C | Manufacturer datasheet |
| Tear strength | Not stated for this profile | Ask us if you need it |
| Dimensional tolerance | ISO 3302-1:2014 Class E2 | Manufacturer datasheet |
| Weight | 0.08 kg per metre | Manufacturer |
| Supplied as | One continuous length, 8 m to 30 m (30 m is a full coil) | Choose a length above |
Lengths and prices
| Length | Price inc VAT | Per metre | Approx. weight |
|---|---|---|---|
| 8 m | £196.02 | £24.50 | 0.64 kg |
| 9 m | £220.53 | £24.50 | 0.72 kg |
| 10 m | £245.04 | £24.50 | 0.80 kg |
| 11 m | £269.52 | £24.50 | 0.88 kg |
| 12 m | £294.03 | £24.50 | 0.96 kg |
| 13 m | £318.54 | £24.50 | 1.04 kg |
| 14 m | £343.05 | £24.50 | 1.12 kg |
| 15 m | £367.53 | £24.50 | 1.20 kg |
| 16 m | £392.04 | £24.50 | 1.28 kg |
| 17 m | £416.55 | £24.50 | 1.36 kg |
| 18 m | £441.06 | £24.50 | 1.44 kg |
| 19 m | £465.54 | £24.50 | 1.52 kg |
| 20 m | £490.05 | £24.50 | 1.60 kg |
| 21 m | £514.56 | £24.50 | 1.68 kg |
| 22 m | £539.07 | £24.50 | 1.76 kg |
| 23 m | £563.55 | £24.50 | 1.84 kg |
| 24 m | £588.06 | £24.50 | 1.92 kg |
| 25 m | £612.57 | £24.50 | 2.00 kg |
| 26 m | £637.08 | £24.50 | 2.08 kg |
| 27 m | £661.56 | £24.50 | 2.16 kg |
| 28 m | £686.07 | £24.50 | 2.24 kg |
| 29 m | £710.58 | £24.50 | 2.32 kg |
| 30 m full coil | £637.20 | £21.24 | 2.40 kg |
Cut lengths are £24.50 per metre inc VAT. The full 30 m coil works out at £21.24 per metre. It costs less than a 27, 28 or 29 m cut length and about the same as 26 m, so if you need 26 m or more, take the coil.
Materials and compliance
This profile is made from solid neoprene (polychloroprene, CR), a general-purpose synthetic rubber with good resistance to weather, flexing and abrasion. The manufacturer states that it is 100 % recyclable. The manufacturer does not state any food-contact (FDA, EC 1935/2004), drinking-water (WRAS), fire-rating, REACH or RoHS approvals in writing for this profile, so we do not claim any. Do not use it where a certified material is required. Ask us for a certified alternative.
How it fits

- Check the edge. Deburr, clean and dry it, and check the sheet is 1.6 mm thick.
- Push on. Start at one end and press the channel down along the edge by hand until the sheet reaches the bottom of the 10.5 mm slot. You need no tools.
- Cut and join. Cut slightly over-length with a sharp knife or shears, then push the ends together into a tight butt joint.
- Bond if needed. Where there is vibration, or where you need a sealed fit (for example round an aluminium window channel), run a bead of polyurethane or silicone sealant into the slot before fitting.
Typical uses
- Edge protection on 1.6 mm (16 gauge) sheet metal, machine guards and enclosure panels
- Finishing the cut edges of doors, hatches and thin plastic or wooden panels
- Knock protection on vending machines, cabinets, furniture and running boards
- Edging 1.6 mm glass, mirror or polycarbonate
- Safety edging on stairs and step plates where a thin edge is exposed
FAQ
What thickness of panel does it fit?
It is made for 1.6 mm sheet. The slot is 1.6 mm wide and 10.5 mm deep. On slightly thinner sheet, bond it in place or pack the slot with a thin rubber strip. For thicker material, choose a channel with a wider slot.
Why choose this one over a shorter U channel?
Its 10.5 mm grip depth is much deeper than most 1.6 mm edge trims, so it holds better by friction and covers more of each face. The 3 mm rounded base gives a thick cushion over the edge.
How do I measure what I need?
Measure the sheet thickness with a caliper, and the total run of edge in metres. Add about 5 % for cutting. If you need 26 m or more, the full 30 m coil is the cheapest option.
Will it stay on without glue?
On a clean 1.6 mm edge it holds by grip alone for most static uses. On moving doors, vibrating machinery or outdoor parts, bond it with polyurethane or silicone sealant.
What temperatures can it take?
The manufacturer gives a working range of −15 °C to +90 °C. For hotter or colder duty, ask us about a silicone U channel.
Can it be used outdoors?
Yes. Neoprene is a weather-resistant rubber, and the manufacturer lists excellent weathering resistance for this profile. For long exposure to strong sunlight or ozone, ask us about an EPDM channel.
How do I cut and join it?
Cut it with a sharp knife, shears or a fine-tooth saw for a square end. Butt the ends tightly together. For a sealed joint, bond the ends with a flexible adhesive or sealant. To go round a tight corner, notch the base slightly so the channel bends without lifting.
Is it food safe or WRAS approved?
No approvals are stated for this profile, so do not use it where food-contact or drinking-water certification is needed.
Is it in stock?
Yes. We hold it in stock and supply it as one continuous length in the size you choose.
Complete your project
- Neoprene U Channel – 6.5mm x 10.5mm – 1.6mm Panel
- U Channel – 1.6mm x 10.5mm Inside – Neoprene, Black
- Neoprene Round U Channel – 4.75mm x 6.5mm – Black Rubber Edge Trim
Need help choosing or fitting? Call +44 1282 277786, email sales@industrial-polymers.co.uk or contact our team.
Product details
| SKU | IP-NEOU-6X13.5X1.6-8 |
|---|---|
| Weight | 1.41 lb |
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Neoprene Round U Channel – 6mm x 13.5mm – For 1.6mm Panels – Black Rubber Edge Trim