
Rubber & FoamSKU IP-PUEP-60X20-STD
PU Foam Edge Protector – 60mm x 20mm Flat Profile – 1m Length
This PU foam edge protector is a flat 60mm x 20mm self-adhesive bumper strip in high-visibility yellow and black, made to cushion flat walls, low beams, columns and machine faces where people, forklifts or trolleys could strike them. Sold as one 1m length.
At a glance
- Flat profile, 60mm wide x 20mm thick, 1m long
- Impact-absorbing polyurethane foam, 40-50 Shore C
- Yellow and black hazard banding for a clear visual warning
- Peel-and-stick self-adhesive back, no tools needed
- Skin resists moisture, oils and UV; -15°C to +75°C
- Cuts to length with a sharp knife or fine saw
Typical uses
- Low ceiling beams, lintels and overhead pipework where heads can strike
- Flat faces of warehouse walls and columns along forklift routes
- Loading dock walls and vehicle backing zones
- Machine guards, enclosure faces and workstation edges
Which one do I need?
| Surface to protect | Best choice |
|---|---|
| Flat face of a beam, wall or machine | This 60mm x 20mm flat foam edge protector |
| Square outside corner of a column or racking | Right angle foam guard 47mm x 47mm |
| Rounded corner protection, smaller section | PU foam round corner protector 40mm x 40mm |
Technical drawing
Specification
| Unit of sale | One 1m length |
| Profile | Flat, 60mm wide x 20mm thick |
| Material | Polyurethane (PU) foam |
| Colour | Yellow / black hazard banding |
| Fixing | Pre-applied self-adhesive back |
| Hardness | 40-50 Shore C |
| Tensile strength | 8-20MPa |
| Elongation at break | 150-350% |
| Tear strength | ≥22kN/m |
| Operating temperature | -15°C to +75°C |
How much do I need?
Measure each hazard edge and round up to whole metres. A 3.4m low beam across a doorway plus a 1.5m machine face is 4.9m, so order 5 lengths. Butt the lengths end to end so the hazard banding runs continuously.
Fitting tips
- Degrease the surface and let it dry fully; the adhesive needs clean, dry, flat substrate.
- Cut to length before peeling, using a sharp knife or fine saw for a square end.
- Peel back a short section of liner, align, then work along the strip pressing firmly across the full 60mm width.
- On joined lengths, keep the hazard banding running the same way for a neat, continuous warning.
Complete your project
- Right Angle Edge Protection Guard – 47 x 47mm Foam, 5m
- PU Foam Round Corner Protector – 40mm x 40mm – 1m
- TPE Edge Protector – 33mm x 45mm Black/Yellow – Pack of 10
Questions
Can I cut this foam edge protector to size?
Yes. The 1m length cuts cleanly with a sharp utility knife or fine-toothed saw.
How is the bumper strip fixed?
A pre-applied self-adhesive tape on the back bonds it to clean, dry, degreased flat surfaces such as painted walls, metal and concrete.
Can it be used outdoors?
Its skin resists moisture, oils and UV light, and it works from -15°C to +75°C, so it suits covered outdoor areas such as loading docks.
Does it fit a corner?
No, this is a flat profile for flat faces. For square corners choose the right angle foam guard.
Need help choosing impact protection? Contact our team for advice.
Product details
| SKU | IP-PUEP-60X20-STD |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:PU Foam Edge Protector – 60mm x 20mm Flat Profile – 1m Length