Rubber & FoamSKU IP-SLP-12X10-BLACK
Silicone L Profile – 12mm x 10mm, Thin Wall 60 Shore A – 25m Coil
This silicone L profile 12mm x 10mm is a compact thin-wall angle in 60° Shore A silicone, with a 2mm horizontal leg and a 4mm vertical leg, made to cap sharp edges on sheet metal, glass and panels. It is sold as one continuous 25m coil in a choice of seven colours.
At a glance
- 12mm x 10mm outer size, 2mm and 4mm leg walls
- Soft 60° Shore A silicone – the softer partner to our firm 70 Shore A version
- Works from -50°C to +180°C
- Compression set 31% (22 hours at 175°C)
- Seven colours for colour-coding or a neat finish
- Supplied as a 25m coil
Typical uses
- Capping exposed edges on sheet metal, glass and panels
- Sealing small doors, enclosures and equipment covers
- Damping vibration and light knocks on edges
- Colour-coding guards and fixtures in production areas
- Finishing edges in clean rooms and laboratories
Which one do I need?
| Profile | Best for |
|---|---|
| 12mm x 10mm thin wall, 60 Shore A (this product) | Soft grip on thin edges and light sealing |
| 12mm x 10mm firm, 70 Shore A | Same size where a stiffer, harder-wearing edge is needed |
| 13mm x 8.1mm | A lower return leg on narrow edges |
| 15mm x 12mm | A slightly larger, heavier-walled edge |
Technical drawing
Specification
| Profile | L angle |
| Outer size | 12mm x 10mm |
| Wall thickness | 2mm (12mm leg), 4mm (10mm leg) |
| Material | Silicone |
| Hardness | 60° Shore A |
| Density | 1.15 g/cm³ |
| Tensile strength | 11 N/mm² |
| Elongation at break | 550% |
| Tear strength | 26 N/mm |
| Compression set | 31% (22 h at 175°C) |
| Rebound resilience | 59% |
| Working temperature | -50°C to +180°C |
| Unit of sale | 25m coil |
How much do I need?
Add up every edge to be capped and allow about 10mm per joint. Example: twelve 600mm x 400mm guard panels capped on all four sides need 12 x 2.0m = 24m, so one 25m coil covers the job.
Fitting tips
- Clean and degrease the edge before fitting.
- Cut a little long and push back to length rather than stretching the profile.
- Push-fit works on most edges; for a permanent seal run a thin bead of silicone sealant inside the angle.
- Mitre the joint at external corners with a sharp blade for a neat finish.
Complete your project
- Silicone L Profile – 12mm x 10mm, Firm 70 Shore A – 25m Coil
- Silicone L Profile – 15mm x 12mm – 25m Coil
- Silicone L Profile – 13mm x 8.1mm – 25m Coil
Questions
What is the difference between this and the 70 Shore A version?
Both are 12mm x 10mm. This one is softer at 60° Shore A, so it grips thin edges more easily; the 70 Shore A version is stiffer and harder-wearing.
Can this silicone L profile be used outdoors?
Yes. Silicone resists UV, ozone and weathering.
How hot can it get?
It works from -50°C up to +180°C.
Does it need adhesive?
It can often be push-fitted. Use a compatible silicone or polyurethane sealant for a permanent or watertight fit.
Which colours are available?
Black, blue, green, red, translucent, white and yellow, each as a 25m coil.
Not sure which size or grade suits your application? Contact our team and we will help you choose.
Product details
| SKU | IP-SLP-12X10-BLACK |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone L Profile – 12mm x 10mm, Thin Wall 60 Shore A – 25m Coil