Rubber & FoamSKU IP-SLP-15.9X6.3X1.5-BLACK-10
Silicone L Profile – 15.9mm x 6.3mm, 1.5mm Wall – 10m or 25m Coil
Price shown updates with the option you pick.
Silicone L profile 15.9mm x 6.3mm is a slim, thin-wall angle trim with a 15.9mm base leg, a short 6.3mm upright and a 1.5mm wall, used to finish and protect thin panel edges and corners. It is sold per coil in 10m or 25m lengths and seven colours.
At a glance
- Unequal L section: 15.9mm x 6.3mm with a 1.5mm wall
- Short upright with a small chamfer on its tip for a neat finished edge
- 60 Shore A silicone with 550% elongation at break
- Stays flexible from -50°C to +180°C
- Material stated as FDA 21 CFR 177.2600 and EC 1935/2004 compliant, and WRAS approved
- 10m or 25m coil in black, blue, green, red, translucent, white or yellow
Typical uses
- Low-profile rubber edge trim on cabinet tops, enclosure lids and panels
- Light corner protector on sheet metal and glass edges
- Colour-coded angle trim on food and drink processing equipment
- Silicone cover strip for small gaps along panel joints
Which one do I need?
| Profile | Best suited to |
|---|---|
| 12.5mm x 7.5mm | Narrower base for smaller edges |
| 15mm x 11.5mm, 2mm wall | Similar base with a taller upright |
| 15.9mm x 6.3mm, 1.5mm wall (this profile) | Slim, low-profile trim where a short upright is wanted |
| 16mm x 10mm | Same base width with a 10mm upright |
| 20mm x 9mm, 6mm to 8mm wall | Wider and much heavier section for impact |
Technical drawing
Specification
| Profile | L section (angle), unequal legs |
| Size | 15.9mm x 6.3mm |
| Wall thickness | 1.5mm |
| Upright tip | Small chamfer |
| Material | Silicone rubber |
| Hardness | 60 Shore A |
| Density | 1.15 g/cm³ |
| Tensile strength | 11 N/mm² |
| Elongation at break | 550% |
| Operating temperature | -50°C to +180°C |
| Compliance | FDA 21 CFR 177.2600, EC 1935/2004, WRAS approved |
| Unit of sale | 10m or 25m coil |
How much do I need?
Measure every edge to be trimmed and add about 5% for trimming and mitred corners. For example, finishing the top front edges of eight 1.2m-wide cabinets needs 8 x 1.2m = 9.6m, plus 5% = 10.1m: a 25m coil gives spare for the side edges, while a 10m coil would fall just short.
Fitting tips
- Clean the edge with isopropyl alcohol and let it dry before fitting.
- The thin wall cuts easily with sharp scissors or a utility knife.
- Do not stretch the trim as you lay it, or it will shrink back from the ends.
- Bond the wide base leg with a thin bead of silicone adhesive sealant for a permanent fix.
Complete your project
- Silicone L Profile – 15mm x 11.5mm, 2mm Wall – 10m or 25m Coil
- Silicone L Profile – 16mm x 10mm – 25m Coil
- Silicone L Profile – 12.5mm x 7.5mm – 25m Coil
Questions
What is this thin angle trim best for?
Light edge finishing and protection where a slim, low-profile look matters more than heavy impact cushioning.
Is it suitable for food areas?
The silicone is stated as FDA and EC 1935/2004 compliant for food contact, and the colours help with colour-coded hygiene zones.
Can it be used outdoors?
Yes. Silicone resists UV, ozone and weathering and stays flexible from -50°C to +180°C.
Which coil length should I choose?
Choose 10m for a few panels or repairs and 25m for longer runs or several machines.
Need help choosing a size or colour? Contact our technical team and we will be glad to advise.
Product details
| SKU | IP-SLP-15.9X6.3X1.5-BLACK-10 |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone L Profile – 15.9mm x 6.3mm, 1.5mm Wall – 10m or 25m Coil