Rubber & FoamSKU IP-SILP-15X14X5-BLACK-10
Silicone L Profile – 15mm x 14mm, 5mm Wall – 10m or 25m Coil
Price shown updates with the option you pick.
A compact, heavy-section silicone L profile: 15mm wide and 14mm high, with a solid 5mm wall on both legs. The thick legs give a firm, cushioned edge that soaks up knocks, and the 10mm inside ledge sits under a panel or sheet while the upright covers its edge. Use it as an edge guard, corner protector, kick strip or seal. The 60 Shore A silicone stays flexible from -50°C to +180°C. Sold in 10m or 25m coils in seven colours, held in UK stock.
At a glance
- Size: 15mm wide x 14mm high, near-equal L (angle) section
- Wall: 5mm thick on both the 14mm upright and the 15mm base, leaving a 9mm inside height and a 10mm inside width
- Material: 60 Shore A silicone rubber, 1.15 g/cm³
- Temperature: -50°C to +180°C working range
- Compliance stated by the manufacturer: FDA 21 CFR 177.2600, EC 1935/2004, WRAS approved, free from TSE/BSE-derived products and phthalates
- Colours: black, blue, green, red, translucent, white and yellow, all at the same price
- Supplied as: 10m coil (£75.00/m) or 25m coil (£39.60/m), cut to length yourself
Technical drawing
![]()
The orange dimensions are the manufacturer's. The 9mm inside height (14 − 5) and 10mm inside width (15 − 5) are worked out from them. Corners are square.
Specification
| Property | Value | Test method / note |
|---|---|---|
| Profile | L (angle) section, solid wall | Manufacturer's drawing |
| Overall width (base leg) | 15 mm | Nominal |
| Overall height (upright leg) | 14 mm | Nominal |
| Upright wall thickness | 5 mm | Nominal |
| Base thickness | 5 mm | Nominal |
| Inside height of upright | 9 mm | Derived (14 − 5) |
| Inside width of base (ledge) | 10 mm | Derived (15 − 5) |
| Dimensional tolerance | Class E2 | ISO 3302-1:2014 |
| Coil length | 10 m or 25 m continuous | One coil per unit |
| Material | Silicone rubber | - |
| Hardness | 60 Shore A | DIN ISO 48-4 |
| Density | 1.15 g/cm³ | DIN EN ISO 1183-1 A |
| Tensile strength | 11 N/mm² (11 MPa) | ISO 37 Type 1 |
| Elongation at break | 550 % | ISO 37 Type 1 |
| Tear strength | 26 N/mm (26 kN/m) | ASTM D624 B |
| Compression set | 31 % after 22 h at 175°C | DIN ISO 815-1 Type B, Method A |
| Rebound resilience | 59 % | ISO 4662 |
| Working temperature | -50°C to +180°C | Manufacturer's data |
| Environmental resistance | Ozone, UV, oxidation, weathering, corona discharge, cosmic and ionising radiation | Manufacturer's data |
| Colours | Black, blue, green, red, translucent, white, yellow | - |
Materials and compliance
The manufacturer's datasheet for this exact profile states that the compound meets:
- FDA 21 CFR 177.2600 (rubber articles for repeated food contact)
- EC 1935/2004 (EU food-contact materials framework)
- WRAS approved material (for use with drinking water)
- Free from TSE/BSE-derived products
- Free from phthalates
We list only the approvals the manufacturer states in writing for this product. If you need a declaration of conformity or a certificate for an audit, ask us before ordering.
How it fits
![]()
One example: on a 9mm panel, board or sheet stack, the 14mm upright covers the whole edge flush with the top face, and the 10mm ledge runs underneath to stop it riding up. On thinner sheet the upright stands proud and forms a raised lip or upstand. Turned the other way, it sits over an outside corner of a cabinet, guard or frame as a cushioned corner protector.
Typical uses
- Corner and edge guards on machine guards, cabinets, enclosures and frames
- Protecting glass, sheet metal and panel edges from knocks and abrasion
- Door, hatch and enclosure edge seals against water, air and dust
- Food and beverage processing equipment (FDA and EC 1935/2004 compound)
- Drinking water and public water supply equipment (WRAS approved material)
- Cleanroom and laboratory edge finishing, and colour-coding by zone or line
- Caravans, motorhomes, classic cars and other transport trim
Which length do I need?
| Coil | Price | Per metre | Best for |
|---|---|---|---|
| 10m | £750.00 | £75.00/m | One cabinet, door or machine guard; repairs and short runs |
| 25m | £990.00 | £39.60/m | Several machines or doors, production lines and keeping stock |
Measure every edge you want to cover and add about 5% for corner cuts and trimming. Example: the top and both side edges of three 1000mm x 1000mm panels need 3 x 3m = 9m, plus 5% = about 9.5m, so one 10m coil covers it. If you need more than 10m, one 25m coil (£990.00) costs less than two 10m coils (£1,500.00).
Fitting tips
- Cut to length with a sharp utility knife against a straight edge for a clean, square end.
- For simple edge protection the profile can be fitted dry, without adhesive.
- For a permanent or watertight fit, bond the inside faces with a compatible silicone or polyurethane adhesive sealant.
- Clean and dry the mounting surface before applying any adhesive.
- At outside corners, mitre both ends at 45° so the lengths meet neatly.
Data sheet
Download the technical data sheet (PDF)
Frequently asked questions
Are 15mm and 14mm inside or outside sizes?
Outside. 15mm is the overall width of the base leg and 14mm the overall height of the upright. Each leg is 5mm thick, so the inside faces measure 10mm wide and 9mm high.
What thickness of panel does it suit?
The inside height of the upright is 9mm, so a 9mm panel fills it with the top flush. Thinner material leaves the upright standing proud as a lip; thicker material will not be fully covered. Check your panel against the drawing.
How firm is it?
60 Shore A is medium-firm, roughly like a pencil eraser. The solid 5mm legs hold their shape and absorb knocks while still bending round gentle curves.
Can it be used in food areas?
Yes. The manufacturer states that the compound meets FDA 21 CFR 177.2600 and EC 1935/2004 for food contact. Blue and other bright colours are popular in food zones because they are easy to spot.
Is it suitable for drinking water equipment?
Yes. The material is WRAS approved.
How hot and cold can it go?
The working range is -50°C to +180°C. Compression set is 31% after 22 hours at 175°C.
Will it survive outdoors?
Yes. Silicone resists UV, ozone and weathering, so it will not crack or perish in sunlight the way many black rubbers can.
How do I cut and join it?
Cut it with a sharp knife. To join it, butt the square-cut ends together and seal them with a dab of silicone sealant. For neat corners, mitre the ends at 45°.
Is the price per metre, and is it in stock?
No, each price is for one complete coil: 10m at £750.00 (£75.00/m) or 25m at £990.00 (£39.60/m). All seven colours in both lengths are held in stock and dispatched from the UK.
Need help choosing a profile, or a quote for several coils? Contact our team or call +44 1282 277786.
Product details
| SKU | IP-SILP-15X14X5-BLACK-10 |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone L Profile – 15mm x 14mm, 5mm Wall – 10m or 25m Coil