Rubber & FoamSKU IP-SILP-17X14-BLACK-10
Silicone L Profile – 17mm x 14mm, Soft 40 Shore A – 10m or 25m Coil
Price shown updates with the option you pick.
This 17mm x 14mm silicone L profile is a soft, solid angle section that fits over corners and exposed edges to cushion, protect and seal them. It is made from 40 Shore A silicone with a thick 5mm wall and is sold as one continuous coil, 10m or 25m long, in a choice of seven colours.
At a glance
- 17mm x 14mm unequal angle with a solid 5mm wall on both legs
- Soft 40 Shore A silicone: flexible, shock-absorbing and easy to bend round corners
- Material complies with FDA 21 CFR 177.2600 for food contact
- WRAS approved material for potable water applications
- Operating temperature range -50°C to +180°C
- Highly resistant to UV, ozone and outdoor weathering
- Seven colours: black, blue, green, red, translucent, white and yellow
Typical uses
- Cushioning and guarding exposed edges of sheet metal, glass and panels
- Sealing around doors, frames and equipment enclosures against water, air and dust
- Machinery guards and HVAC housings
- Food and beverage processing equipment
- Drinking water and public water supply installations
- Cleanroom and laboratory edge finishing, and colour-coding for identification
Which one do I need?
| Coil length | Best for |
|---|---|
| 10m coil | A single cabinet, door or machine guard; repairs and short runs |
| 25m coil | Several machines or doors, production lines and keeping stock; lower cost per metre |
Choose this soft 40 Shore A grade with its thick 5mm wall where impact cushioning and a forgiving fit matter most; for a slimmer, firmer edge choose one of our thin-wall 60 Shore A L profiles.
Technical drawing
Specification
| Material | Silicone rubber |
| Width | 17mm |
| Height | 14mm |
| Wall thickness | 5mm |
| Hardness | 40 Shore A |
| Density | 1.12 g/cm³ |
| Tensile strength | 9.6 N/mm² |
| Elongation at break | 770% |
| Operating temperature | -50°C to +180°C |
| Food contact | FDA 21 CFR 177.2600 compliant material |
| Potable water | WRAS approved material |
| Colours | Black, blue, green, red, translucent, white, yellow |
| Unit of sale | One continuous coil of the chosen length (10m or 25m) |
How much do I need?
Measure every edge you want to cover and add about 5% for corner cuts and trimming. Example: guarding the top and both side edges of four 1200mm x 1000mm machine panels needs 4 x (1.2m + 1.0m + 1.0m) = 12.8m, plus 5% = about 13.5m, so one 25m coil covers it with spare for maintenance. For a single panel (about 3.4m) one 10m coil is plenty.
Fitting tips
- Cut to length with a sharp utility knife against a straight edge for a clean, square end.
- For simple edge protection the soft profile can be fitted without adhesive.
- For a secure or watertight seal, bond it with a compatible silicone or polyurethane adhesive sealant.
- Clean and dry the mounting surface before applying any adhesive.
- At outside corners, mitre the profile at 45° so the two lengths meet neatly.
Complete your project
- Silicone L Profile – 15mm x 11.5mm, 2mm Wall – 10m or 25m Coil
- Silicone L Profile – 25.4mm x 19.1mm – 10m or 25m Coil
- EPDM Square U Channel – 6mm x 9.5mm – Per Metre
Data sheet
Download the technical data sheet (PDF)
Questions
Is this profile suitable for food and drinking water applications?
Yes. The silicone complies with FDA 21 CFR 177.2600 for food contact and is a WRAS approved material for potable water use.
Can it be used outdoors?
Yes. Silicone is highly resistant to UV, ozone and weathering, so it stays flexible outside.
How soft is 40 Shore A?
Noticeably softer than a typical rubber seal. With 770% elongation at break it bends easily round corners and absorbs knocks well.
Does it need adhesive?
Not for basic edge protection. Bond it with a silicone or polyurethane sealant where it must stay put or seal against water.
Is the price per metre?
No. The price is for one complete coil of the length you choose, 10m or 25m.
Need help choosing a profile? Contact our team.
Product details
| SKU | IP-SILP-17X14-BLACK-10 |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone L Profile – 17mm x 14mm, Soft 40 Shore A – 10m or 25m Coil