Rubber & FoamSKU IP-SLP-21.6X15X5-BLACK-10
Silicone L Profile – 21.6mm x 15mm, 5mm Wall – 10m or 25m Coil
Price shown updates with the option you pick.
This silicone L profile 21.6mm x 15mm is a heavy-section, unequal-leg angle with a solid 5mm wall: the 21.6mm leg sits flat on the face while the 15mm leg wraps the edge, giving a tough, cushioned corner guard and seal. It is sold as one continuous coil of 10m or 25m, in seven colours.
At a glance
- Unequal L profile: 21.6mm leg x 15mm leg, 5mm thick throughout
- Heavy wall for impact protection on corners, frames and panel edges
- 60° Shore A silicone, FDA compliant and WRAS approved
- Stays flexible from -50°C to +180°C
- Strong resistance to UV, ozone and weathering
- Black, blue, green, red, translucent, white or yellow
- Supplied as a 10m or 25m coil
Typical uses
- Rubber angle trim and corner guard on cabinets, machine frames and enclosures
- Edge protector for glass, sheet metal and composite panels
- Corner seal on doors, hatches and HVAC housings
- Hygienic edge trim in food, drink and pharmaceutical plants
- Edge finishing in cleanrooms and laboratories
- Potable water equipment where a WRAS approved material is needed
Which one do I need?
| Profile | Legs | Best for |
|---|---|---|
| 16mm x 10mm | Unequal, lighter section | Smaller edges and light-duty trim |
| 20mm x 25mm | Near-equal, 1mm wall | Thin, flexible cover strip rather than a guard |
| 21.6mm x 15mm (this item) | Unequal, 5mm wall | Mid-size corners that need a thick, impact-absorbing guard |
| 25.4mm x 19.1mm | Unequal | Slightly larger corners and frames |
| 30mm x 15mm | Unequal | Wider face with the same 15mm return |
Technical drawing
Specification
| Profile | Unequal L, 21.6mm x 15mm |
| Wall thickness | 5mm |
| Material | Silicone |
| Hardness | 60° Shore A |
| Density | 1.15 g/cm³ |
| Tensile strength | 11 N/mm² |
| Elongation at break | 550% |
| Tear strength | 26 N/mm |
| Rebound resilience | 59% |
| Compression set (22 h at 175°C) | 31% |
| Operating temperature | -50°C to +180°C |
| Compliance | FDA 21 CFR 177.2600, EC 1935/2004, WRAS approved |
| Colours | Black, blue, green, red, translucent, white, yellow |
| Unit of sale | One coil, 10m or 25m |
How much do I need?
Measure every corner or edge to be covered and add about 5% for trimming. Example: the two front vertical corners and the top front edge of a 1.8m tall, 1.2m wide control cabinet need 2 x 1.8 + 1.2 = 4.8m, plus 5% = about 5m, so a 10m coil covers two cabinets; for a run of five or more, choose a 25m coil.
Fitting tips
- Clean and degrease the surface so both legs sit flat against the corner.
- Decide which face takes the wider 21.6mm leg before cutting; it gives the most protection on the face that takes knocks.
- Cut with a sharp blade and mitre the ends at 45° where two runs meet.
- For a permanent or watertight fit, bond it with a silicone or polyurethane adhesive suitable for silicone rubber.
Complete your project
- Silicone L Profile – 25.4mm x 19.1mm – 10m or 25m Coil
- Silicone L Profile – 30mm x 15mm – 10m or 25m Coil
- Silicone L Profile – 16mm x 10mm – 25m Coil
Questions
What size is this silicone L profile?
The legs measure 21.6mm and 15mm on the outside, and both are a solid 5mm thick, so it suits edges and corners where a heavy guard is wanted.
Is this silicone angle trim food safe?
Yes. The silicone meets FDA 21 CFR 177.2600 and EC 1935/2004 and is WRAS approved for potable water.
Can the edge protector be used outdoors or on hot equipment?
Yes. It resists UV, ozone and weather and stays flexible from -50°C to +180°C.
Does it need adhesive?
An L profile does not grip an edge on its own, so for most fixed installations bond it with a silicone-compatible adhesive or sealant.
Do all colours cost the same?
Yes, every colour is the same price for the same coil length.
Need help choosing a profile? Contact our team and we will help you pick the right size.
Product details
| SKU | IP-SLP-21.6X15X5-BLACK-10 |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone L Profile – 21.6mm x 15mm, 5mm Wall – 10m or 25m Coil