Rubber & FoamSKU IP-SILP-30X19X1.3-BLACK-10
Silicone L Profile – 30mm x 19mm, 1.3mm Wall – 10m or 25m Coil
Price shown updates with the option you pick.
This silicone L profile provides durable edge protection and sealing for sharp or vulnerable corners. Made from FDA-compliant and WRAS-approved 60 Shore A silicone, it suits food, beverage and water applications as well as general industrial use. Sold as one coil, 10m or 25m long, in a choice of seven colours.
At a glance
- 30mm x 19mm L-shaped profile with a 1.3mm wall
- Made from 60 Shore A silicone rubber
- FDA compliant (21 CFR 177.2600) for food contact
- WRAS approved for potable water and public water supplies
- Excellent resistance to UV, ozone and weathering
- Wide operating temperature range of -50°C to +180°C
- Available in seven colours for identification and finishing
Typical uses
- Protecting glass, sheet metal and panel edges from impact and abrasion
- Sealing doors, enclosures and equipment against water, dust and debris
- Food and beverage processing and handling environments
- Potable water systems and public water supplies
- Cleanrooms, laboratories and hygiene-critical areas
- Automotive, transport and HVAC machinery enclosures
Which one do I need?
| Option | Best for |
|---|---|
| 10m coil | Smaller projects, single enclosures or short runs of edge protection |
| 25m coil | Larger installations, continuous runs or bulk requirements |
| 1.3mm wall (this product) | Full 1.3mm thickness along both legs, with only a short feathered tip on the 30mm leg - the sturdier of the two 30mm x 19mm versions |
| Tapered 0.5-1.3mm wall | A separate version whose 30mm leg thins steadily to 0.5mm, for a lower, finer edge |
Technical drawing
Specification
| Unit of sale | One coil (10m or 25m) |
| Colours | Black, Blue, Green, Red, Translucent, White, Yellow |
| Material | Silicone |
| Hardness | 60° Shore A |
| Width | 30mm |
| Height | 19mm |
| Wall thickness | 1.3mm (short feathered tip on the 30mm leg) |
| Density | 1.15 g/cm³ |
| Tensile Strength | 11 N/mm² |
| Elongation at Break | 550% |
| Compression Set (22h @ 175°C) | 31% |
| Tear Strength | 26 N/mm |
| Rebound Resilience | 59% |
| Operating Temperature | -50°C to +180°C |
How much do I need?
Measure the total length of the edges or corners you need to protect or seal. For example, edging four 2m panels needs 8m in total, so a 10m coil is enough. Edging ten 2m panels (20m in total) needs a 25m coil.
Fitting tips
- Make sure the edge or corner is clean, dry and free from grease before fitting.
- Cut the profile to length with a sharp utility knife or shears for a clean, square end.
- For many applications the profile grips the edge snugly without adhesive.
- For a permanent or watertight seal, bond it with a compatible polyurethane or silicone adhesive or sealant.
Complete your project
- Silicone L Profile – 30mm x 30mm, Uniform 6mm Wall – 10m or 25m Coil
- EPDM Square U Channel – 5mm x 8.5mm – Black Rubber Edge Trim – Cut to Length
- EPDM Rubber U Channel – 5.5mm x 8.5mm to Fit 3mm Panel – Cut Length
Data sheet
Download the technical data sheet (PDF)
Questions
Is this profile suitable for drinking water applications?
Yes, the material is WRAS approved, so it suits potable water and public water supplies.
Can I use this in a food preparation area?
Yes, the silicone is FDA compliant (21 CFR 177.2600), so it suits food-contact applications.
Will this profile withstand outdoor use?
Yes, it resists UV, ozone and outdoor weathering for long-term performance.
How is this different from the tapered 30mm x 19mm profile?
This version keeps its full 1.3mm thickness until a short tip at the end of the 30mm leg, so it is sturdier. The tapered version thins steadily to 0.5mm for a finer, lower edge.
Can I bond this profile to metal or glass?
Yes, use a compatible polyurethane or silicone adhesive for a secure installation.
If you need further assistance, please contact our team.
Product details
| SKU | IP-SILP-30X19X1.3-BLACK-10 |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone L Profile – 30mm x 19mm, 1.3mm Wall – 10m or 25m Coil