Rubber & FoamSKU IP-SILP-30X19X1.3-8E8A-BLACK-10
Silicone L Profile – 30mm x 19mm, Tapered 0.5-1.3mm Wall – 10m or 25m Coil
Price shown updates with the option you pick.
This silicone L profile is a versatile angle extrusion that fits over corners and exposed edges for impact protection, sealing and a clean finish. Made from 60 Shore A silicone, it has a 30mm leg and a 19mm leg, with the 30mm leg tapering from 1.3mm at the corner down to 0.5mm at its edge. Sold as one coil, 10m or 25m long, in a choice of seven colours.
At a glance
- 30mm x 19mm L-shaped angle profile
- Tapered wall from 1.3mm at the corner to 0.5mm at the edge
- 60 Shore A silicone rubber
- FDA compliant and WRAS approved for food and water contact
- Operating temperature range from -50°C to +180°C
- Available in seven colours for identification or finishing
Typical uses
- Protecting vulnerable edges on glass, sheet metal and panels
- Sealing around doors, enclosures and HVAC equipment
- Food and beverage processing applications
- Potable water systems and public water supplies
- Cleanroom and laboratory edge finishing
Which one do I need?
| Option | Best for |
|---|---|
| 10m coil | Smaller projects, single enclosures or repairs |
| 25m coil | Larger installations, continuous runs or bulk stock |
| Tapered wall (this product) | A fine, low edge that blends into the surface (1.3mm to 0.5mm) |
| 1.3mm wall (alternative) | A sturdier edge with full 1.3mm thickness along both legs |
Technical drawing
Specification
| Unit of sale | One coil (10m or 25m) |
| Colours | Black, Blue, Green, Red, Translucent, White, Yellow |
| Material | Silicone |
| Hardness | 60° Shore A |
| Width | 30mm |
| Height | 19mm |
| Thickness | 0.5mm to 1.3mm (tapered) |
| Density | 1.15 g/cm³ |
| Tensile Strength | 11 N/mm² |
| Elongation at Break | 550% |
| Compression Set | 31% (22 hours at 175°C) |
| Tear Strength | 26 N/mm |
| Rebound Resilience | 59% |
| Operating Temperature | -50°C to +180°C |
Installation and care
This silicone edge profile is easy to work with and cuts to length with standard tools. For many applications it can be positioned without adhesive. Where a secure or watertight installation is needed, bond it with a compatible silicone or polyurethane adhesive or sealant.
Fitting tips
- Make sure the mounting edge is clean, dry and free from grease before fitting.
- Lay the tapered 30mm leg on the face you want the edge to blend into.
- Use a sharp utility knife or shears for a clean, square cut.
- If bonding, apply adhesive evenly along the inner faces of the L profile.
Complete your project
- Silicone L Profile – 30mm x 30mm, Uniform 6mm Wall – 10m or 25m Coil
- EPDM U Channel – 4.8mm x 9.6mm – Black Rubber Edge Trim – Per Length
- EPDM Square U Channel – 5mm x 8.5mm – Black Rubber Edge Trim – Cut to Length
Data sheet
Download the technical data sheet (PDF)
Questions
Is this profile suitable for drinking water applications?
Yes, the silicone is WRAS approved, so it suits potable water and public water supply systems.
Can I use this in a food processing environment?
Yes, the material complies with FDA 21 CFR 177.2600 for food-contact applications.
Why choose the tapered version?
The 30mm leg thins to 0.5mm at its edge, so it sits low against the surface and leaves a neat, less visible line.
How do I cut the profile?
It cuts easily with a sharp utility knife or heavy-duty shears.
Does it need to be glued in place?
It can often be push-fitted without adhesive, but for a permanent or watertight seal use a compatible silicone or polyurethane sealant.
If you need further assistance, please contact our team.
Product details
| SKU | IP-SILP-30X19X1.3-8E8A-BLACK-10 |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone L Profile – 30mm x 19mm, Tapered 0.5-1.3mm Wall – 10m or 25m Coil