Rubber & FoamSKU IP-SILP-33X33-BLACK-10
Silicone L Profile – 33mm x 33mm – 10m or 25m Coil
Price shown updates with the option you pick.
This silicone L profile 33mm x 33mm is a heavy-duty equal-leg angle with a solid 10mm wall, built to guard exposed corners on machine frames, cabinets, glazing and doorways where knocks are frequent. Choose a 10m or 25m coil in one of seven colours.
At a glance
- Large rubber corner guard: 33mm x 33mm equal angle
- Solid 10mm wall absorbs impact on busy edges
- 60 Shore A silicone – tough yet flexible
- Working range -50°C to +180°C
- Food-contact and potable-water compliant silicone
- Resists UV, ozone and weathering; free from phthalates
- Seven colours, ideal for colour-coding hazards or zones
Typical uses
- Corner protector on machine frames, guards and control cabinets
- Impact strip on door frames and wall corners in production areas
- Edge cover for thick glass, polycarbonate and composite panels
- Hygienic corner trim on food and drink processing equipment
- Heat-resistant edge on oven enclosures and drying lines
Which one do I need?
| Profile / coil | Best for |
|---|---|
| 30mm x 30mm | Slightly smaller corners, similar heavy section |
| 33mm x 33mm (this item) | Large corners that need a thick 10mm protective wall |
| 58mm x 32mm | Wide faces where one leg must cover more surface |
| 10m coil | Single machines, repairs and short runs |
| 25m coil | Long runs and fitting several machines |
Technical drawing
Specification
| Product | Silicone L profile (equal angle) |
| Width | 33mm |
| Height | 33mm |
| Wall thickness | 10mm |
| Material | Silicone rubber |
| Hardness | 60° Shore A |
| Density | 1.15 g/cm³ |
| Tensile strength | 11 N/mm² |
| Elongation at break | 550% |
| Tear strength | 26 N/mm |
| Operating temperature | -50°C to +180°C |
| Approvals | FDA 21 CFR 177.2600, EC 1935/2004, WRAS |
| Unit of sale | One coil, 10m or 25m |
How much do I need?
Measure each corner or edge and add 5% for trimming. Example: six machine cabinets, each with two 1.8m vertical corners to guard, need 6 x 2 x 1.8m = 21.6m, plus 5% = about 22.7m – one 25m coil. A single cabinet (3.8m) fits easily in a 10m coil.
Fitting tips
- Clean and degrease both faces of the corner before bonding.
- Apply a silicone or polyurethane adhesive to both inside faces of the angle.
- Cut with rubber shears or a sharp blade in several passes – the 10mm wall is thick.
- Tape the strip in place while the adhesive cures on vertical corners.
Complete your project
- Silicone L Profile – 30mm x 30mm, 5–10mm Wall – 10m or 25m Coil
- Silicone L Profile – 58mm x 32mm – 10m or 25m Coil
- Silicone L Profile – 10mm x 10mm – 25m Coil
Data sheet
Download the technical data sheet (PDF)
Questions
Is this heavy-duty corner guard suitable outdoors?
Yes. Silicone resists UV, ozone and weathering.
Can it be used in food production areas?
Yes. The silicone complies with FDA 21 CFR 177.2600 and EC 1935/2004 for food contact.
Is it suitable for drinking water equipment?
Yes. The material is WRAS approved for potable water use.
Which coil length should I order?
Add up your edge lengths plus 5%; under 10m choose the 10m coil, otherwise the 25m coil.
How do I fix the rubber angle in place?
Bond it with a silicone or polyurethane adhesive on clean, dry faces.
Need help choosing a size? Contact our team.
Product details
| SKU | IP-SILP-33X33-BLACK-10 |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone L Profile – 33mm x 33mm – 10m or 25m Coil