Rubber & FoamSKU IP-SILP-39X36-BLACK-10
Silicone L Profile – 39mm x 36mm – 10m or 25m Coil
Price shown updates with the option you pick.
This silicone L profile 39mm x 36mm is a large, near-equal angle with a 3mm wall, made to cover and seal the corners of cabinets, panels, glazing and machine guards. Choose from seven colours, each sold as one 10m or 25m coil.
At a glance
- Near-equal legs of 39mm and 36mm with a 3mm wall
- Soft 50° Shore A silicone that grips over corners
- FDA compliant for food contact and WRAS approved for drinking water
- Resists UV, ozone and weathering
- Works from -50°C to +180°C
- Black, blue, green, red, translucent, white or yellow
Typical uses
- Corner protection on cabinets, panels and machine guards
- Edge sealing on doors, hatches and enclosures
- Food and drink processing equipment
- Potable water plant and tanks
- Clean rooms, laboratories and HVAC housings
Which one do I need?
| Size | Best for |
|---|---|
| 40mm x 25mm | A wide top leg with a shorter return |
| 39mm x 36mm (this product) | Large square corners needing two near-equal legs |
| 58mm x 32mm | Wider top faces and deep edges |
| 65mm x 20mm | Very wide cover with a short return |
Technical drawing
Specification
| Profile | L angle, near-equal legs |
| Leg sizes | 39mm x 36mm |
| Wall thickness | 3mm |
| Material | Silicone |
| Hardness | 50° Shore A |
| Density | 1.15 g/cm³ |
| Tensile strength | 12 N/mm² |
| Elongation at break | 640% |
| Working temperature | -50°C to +180°C |
| Approvals | FDA 21 CFR 177.2600, EC 1935/2004, WRAS |
| Colours | Black, blue, green, red, translucent, white, yellow |
| Unit of sale | One coil, 10m or 25m |
How much do I need?
Add up every edge to be covered and allow about 20mm per corner joint. Example: the four vertical corners and top front edge of a 1.8m tall, 1.2m wide cabinet need 4 x 1.8m + 1.2m = 8.4m, so a 10m coil does one cabinet; for three cabinets choose the 25m coil.
Fitting tips
- Clean and dry the corner before fitting so the profile seats fully.
- Push-fit is enough for guarding; bond with a silicone or polyurethane sealant for a watertight seal.
- Cut square with a sharp blade and mitre the joint at external corners for a neat finish.
- Lay the coil out at room temperature before cutting so it relaxes straight.
Complete your project
- Silicone L Profile – 40mm x 25mm – 10m or 25m Coil
- Silicone L Profile – 58mm x 32mm – 10m or 25m Coil
- Silicone L Profile – 65mm x 20mm – 10m or 25m Coil
Questions
Is this L profile suitable for drinking water?
Yes. The silicone is WRAS approved for potable water use.
Can it be used on food equipment?
Yes. It complies with FDA 21 CFR 177.2600 and EC 1935/2004 for food contact.
Will it stay on without glue?
On a square corner it grips well as a push-fit. Use a compatible adhesive sealant where it must be permanent or watertight.
Can it be used outdoors?
Yes. Silicone resists UV, ozone and weathering and stays flexible from -50°C to +180°C.
Which colours are available?
Black, blue, green, red, translucent, white and yellow, each in 10m or 25m coils.
Not sure which size or grade suits your application? Contact our team and we will help you choose.
Product details
| SKU | IP-SILP-39X36-BLACK-10 |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone L Profile – 39mm x 36mm – 10m or 25m Coil