Rubber & FoamSKU IP-SILP-49X45-BLACK-10
Silicone L Profile – 49mm x 45mm – 10m or 25m Coil
Price shown updates with the option you pick.
This silicone L profile 49mm x 45mm is a large, hard-wearing silicone angle for protecting and sealing exposed corners on enclosures, machine guards, glass and sheet panels. It has a 49mm base and a 45mm upstand and is sold as one continuous 10m or 25m coil in a choice of seven colours.
At a glance
- Large silicone angle trim: 49mm base x 45mm upstand
- Thick 7.9mm base leg with a 3mm upstand leg
- Firm 80 Shore A silicone holds its shape as a corner guard
- Works from -50°C to +180°C and resists UV, ozone and weathering
- FDA-compliant and WRAS-approved silicone compound
- Seven colours: black, blue, green, red, translucent, white and yellow
- Sold per coil: 10m or 25m
Typical uses
- Corner and edge protection on stainless and powder-coated enclosures
- Rubber angle trim along machine guard and panel edges
- Colour-coded corner seals in food, dairy and drinks plants
- Sealing strips on HVAC housings, cabinets and access doors
- Edge finishing in cleanrooms and laboratories
Which one do I need?
| Size | Choose it when |
| 40mm x 25mm | You need a lighter angle with a shorter upstand on thinner panels |
| 49mm x 45mm (this profile) | You want a near-equal, deep angle that covers 45mm up the face and 49mm across, with a thick base for impact |
| 58mm x 32mm | The base must cover more width but the upstand can be lower |
| 65mm x 20mm | You need a wide flat flange with only a short lip |
Technical drawing
Specification
| Material | Silicone |
| Base leg | 49mm wide, 7.9mm thick |
| Upstand leg | 45mm high, 3mm thick |
| Hardness | 80 Shore A |
| Density | 1.20 g/cm³ |
| Tensile strength | 10 N/mm² |
| Elongation at break | 440% |
| Tear strength | 28 N/mm |
| Compression set | 78% (22 hours at 175°C) |
| Operating temperature | -50°C to +180°C |
| Colours | Black, blue, green, red, translucent, white, yellow |
| Unit of sale | One 10m or 25m coil |
How much do I need?
Measure every edge you want to cover and add about 5% for cutting. Example: guarding the four vertical corners and four top edges of a 1.8m tall cabinet with a 1.2m x 0.6m top needs 4 x 1.8m + 2 x 1.2m + 2 x 0.6m = 10.8m, plus 5% = about 11.3m, so a 25m coil covers two cabinets.
Fitting tips
- Cut square with a sharp knife or shears; mitre at 45° where two lengths meet at a corner.
- Clean and degrease the panel edge before fitting.
- Bond with a compatible silicone sealant or adhesive for a permanent, watertight fit.
- Place the thick 7.9mm leg on the face that takes the knocks.
Complete your project
- Silicone L Profile – 40mm x 25mm – 10m or 25m Coil
- Silicone L Profile – 58mm x 32mm – 10m or 25m Coil
- Silicone L Profile – 65mm x 20mm – 10m or 25m Coil
Questions
Is this silicone angle trim safe for drinking water?
Yes, the silicone compound is WRAS approved for potable water use.
Can the 49mm x 45mm silicone L profile be used for food areas?
Yes, the compound complies with FDA 21 CFR 177.2600, and the colour options help with colour-coded zones.
Does it work outdoors?
Yes, it resists UV, ozone and weathering and stays flexible from -50°C to +180°C.
How do I fix this edge protector in place?
It can sit over an edge for light duty, but for a permanent seal bond it with a compatible silicone sealant.
Need help choosing a size? Contact our team.
Product details
| SKU | IP-SILP-49X45-BLACK-10 |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone L Profile – 49mm x 45mm – 10m or 25m Coil