Rubber & FoamSKU IP-SILP-14X13-BLACK
Silicone L Profile – 14mm x 13mm – 25m Coil
Silicone L profile 14mm x 13mm is a compact, heavy-wall angle section with a 10.5mm-thick upright and a 7mm-thick base leg, used to protect, cushion and seal small square edges. It is sold per 25m coil in seven colours.
At a glance
- Unequal-wall L section: 14mm wide x 13mm high
- Very thick walls: 10.5mm upright and 7mm base leg, almost a solid stepped bar
- 60 Shore A silicone with 550% elongation at break
- Stays flexible from -50°C to +180°C
- Material stated as FDA 21 CFR 177.2600 and EC 1935/2004 compliant, and WRAS approved
- 25m coil in black, blue, green, red, translucent, white or yellow
Typical uses
- Tough rubber edge protector on small sheet metal and panel corners
- Silicone corner seal on enclosure doors, covers and inspection hatches
- Colour-coded edge trim on food and drink processing machinery
- Cushioned stop or buffer strip on equipment frames
Which one do I need?
| Profile | Best suited to |
|---|---|
| 12mm x 10mm, firm 70 Shore A | Slightly smaller angle in a firmer grade |
| 14mm x 10mm | Same 14mm base with a lower 10mm upright |
| 14mm x 13mm, 7mm to 10.5mm wall (this profile) | Small edges that need a very thick, hard-wearing section |
| 15mm x 12mm, 5mm wall | Similar size with a lighter 5mm wall |
| 15mm x 14mm, 5mm wall | Slightly taller, also sold in 10m coils |
Technical drawing
Specification
| Profile | L section (angle), unequal walls |
| Size | 14mm wide x 13mm high |
| Upright wall | 10.5mm |
| Base leg wall | 7mm |
| Material | Silicone rubber |
| Hardness | 60 Shore A |
| Density | 1.15 g/cm³ |
| Tensile strength | 11 N/mm² |
| Elongation at break | 550% |
| Operating temperature | -50°C to +180°C |
| Compliance | FDA 21 CFR 177.2600, EC 1935/2004, WRAS approved |
| Unit of sale | 25m coil |
How much do I need?
Add up every edge to be covered and allow about 5% for trimming and mitres, then divide by 25 to get the number of coils. For example, edging ten 600mm x 400mm inspection covers needs 10 x 2m = 20m, plus 5% = 21m: one 25m coil does the job.
Fitting tips
- Clean the edge with isopropyl alcohol and let it dry before fitting.
- Cut the thick section with a sharp long blade in one firm stroke for a square end.
- Mitre external corners at 45° for a neat, sealed join.
- Bond both legs with a silicone adhesive sealant for a permanent or watertight fit.
Complete your project
- Silicone L Profile – 14mm x 10mm – 25m Coil
- Silicone L Profile – 15mm x 12mm – 25m Coil
- Silicone L Profile – 15mm x 14mm, 5mm Wall – 10m or 25m Coil
Questions
Why are the walls different thicknesses?
The 10.5mm upright gives a thick cushion on the exposed face, while the 7mm base leg leaves enough room to sit on or bond to the edge.
Is this angle trim suitable for food areas?
The silicone is stated as FDA and EC 1935/2004 compliant for food contact, and the colours help with colour-coded hygiene zones.
Can it be used outdoors?
Yes. Silicone resists UV, ozone and weathering and stays flexible from -50°C to +180°C.
How do I fix it in place?
Push it onto the edge for light protection, or bond both legs with a silicone adhesive sealant for a permanent fix.
Need help choosing a size or colour? Contact our technical team and we will be glad to advise.
Product details
| SKU | IP-SILP-14X13-BLACK |
|---|
More from this range
Request a quote
Fast, no-obligation price from our UK team for:Silicone L Profile – 14mm x 13mm – 25m Coil